Deconvolution Algorithms

Deconvolution refers to the process of reconstructing a model of the sky brightness distribution, given a dirty/residual image and the point-spread-function of the instrument. This process is called a deconvolution because under certain conditions, the dirty/residual image can be written as the result of a convolution of the true sky brightness and the PSF of the instrument. Deconvolution forms the minor cycle of iterative image reconstruction in CASA.

Type Figure
ID FigConvolution.png
Caption The observed image (left) is the result of a convolution of the PSF (middle) and the true sky brightness distribution (right).

The image reconstruction framework is based on Cotton-Schwab major/minor cycles [1]. Within this system, the minor cycle algorithm operates largely in the image domain starting with a PSF and a residual image (i.e. the gradient of chi-square or the right hand side of the normal equations). The output is an incremental model image that defines the 'step' taken during the chi-square minimization process. In the next major cycle, the contribution of this model image is subtracted out of the list of visibilities and the result is regridded and transformed to produce a new residual image. This approach allows for a practical trade-off between the efficiency of operating in the image domain (or simply with gridded visibilities) and the accuracy that comes from returning to the ungridded list of visibilities after every 'step'. It also allows for minor cycle algorithms that have their own internal optimization schemes (i.e. they need not be strict chi-square minimizations) with their own control parameters. Note that any minor cycle algorithm that can operate on gridded visibilities can fit into this framework. The inputs to the minor cycle algorithm are the residual image, psf and perhaps a starting model. Outputs are a model image.


CLEAN Algorithm

The CLEAN algorithm forms the basis for most deconvolution algorithms used in radio interferometry. The peak of the residual image gives the location and strength of a potential point source. The effect of the PSF is removed by subtracting a scaled PSF from the residual image at the location of each point source, and updating the model. Many such iterations of finding peaks and subtracting PSFs form the minor cycle.

There are several variants of the CLEAN algorithm. Some operate with a delta function sky model and others with a multi-scale sky model. In all cases, the the sky brightness is parameterized in a sparse basis such that in practice, the minor cycle algorithm needs only to search for the location and amplitude of peaks. This makes it efficient. For example, fields of compact sources are best represented by delta function locations and amplitudes. Extended emission is modeled as a linear combination of components of different scale sizes and transformed into a multi-scale basis where again, delta functions are all that are required to mark the location and amplitude of blobs of different sizes. Multi-term algorithms for wideband imaging model the sky brightness and its spectrum simultaneously, using coefficients of a Taylor polynomial as a sparse representation of a smooth spectrum. In this case, the location of each (multi-scale) component is chosen via a search and the values of the Taylor coefficients for that component are solved for via a direct linear least squares calculation.



Hogbom CLEAN [2] operates with a point-source model of the sky brightness distribution. The minor cycle searches for the location and amplitude of components and then subtracts a scaled and shifted version of the full PSF to update the residual image for each point source. This algorithm is efficient in that delta functions are optimal for fields of compact sources, but susceptible to errors due to inappropriate choices of imaging weights, especially if the PSF has high sidelobes. It uses the full PSF during its update step to ensure that the next residual is as accurate as possible, but this can get compute intensive.  

In its original form, the Hogbom algorithm operated just once in the image domain without new residuals being computed via a major cycle. In our CASA Imager implementation, it is treated as a minor cycle where one periodically does major cycles as well (to guard against minor cycle evolution that is not strictly constrained by the ungridded visibilities).

Since Hogbom CLEAN uses only delta functions, it is most appropriate for fields of isolated point sources. It will incur errors when imaging extended emission and this is typically seen as a mottled appearance of smooth structure and the presence of correlated residuals.



Clark CLEAN [3] also operates only in the image-domain, and uses a point-source model. There are two main differences from the Hogbom algorithm. The first is that it does its residual image updates using only a small patch of the PSF. This is an approximation that will result in a significant speed-up in the minor cycle, but could introduce errors in the image model if there are bright sources spread over a wide field-of-view where the flux estimate at a given location is affected by sidelobes from far-out sources. The second difference is designed to compensate for the above. The iterations are stopped when the brightest peak in the residual image is below the first sidelobe level of the brightest source in the initial residual image and the residual image is re-computed by subtracting the sources and their responses in the gridded Fourier domain (to eliminate aliasing errors). Image domain peak finding and approximate subtractions resume again. These two stages are iterated between until the chosen minor cycle exit criteria are satisfied (to trigger the next true major cycle that operates on ungridded visibilities).

Since Clark CLEAN also uses only delta function, it is similar in behavior to Hogbom. The main difference is that the minor cycle is expected to be much faster (for large images) because only a small fraction of the PSF is used for image-domain updates. Typically, errors due to such a truncation are controlled by transitioning to a uv-uv">subtraction or a major cycle when the peak residual reaches the level of the highest sidelobe for the strongest feature.



Cornwell-Holdaway Multi-Scale CLEAN (CH-MSCLEAN) [4] is a scale-sensitive deconvolution algorithm designed for images with complicated spatial structure. It parameterizes the image into a collection of inverted tapered paraboloids. The minor cycle iterations use a matched-filtering technique to measure the location, amplitude and scale of the dominant flux component in each iteration, and take into account the non-orthogonality of the scale basis functions while performing updates. In other words, the minor cycle iterations consider all scales together and model components are chosen in the order of decreasing integrated flux.

MS-CLEAN can be formulated as a chi-square minimization applied to a sky model that parameterizes the sky brightness as a linear combination of flux components of different scale sizes. The figure below illustrates how a source with multi-scale features is represented by two scale sizes (for example) and how the problem reduces to one of finding the location and amplitudes of delta function components (something for which a CLEAN based approach is optimal). The top left and bottom left images show flux components of two different scale sizes. The images in the middle column show sets of delta functions that mark the locations and amplitudes of the flux components for each scale. The image on the far right is the sum of the convolutions of the first two columns of images. 

Type Figure
ID fig_msmodel.png

A pictorial representation of how a source with structure at multiple spatial scales is modeled in MS-CLEAN.

Choosing 'scales'

In practice, the user must specify a set of scale sizes for the algorithm to use (in units of the number of pixels). As of now, this can be done only manually with the user making guesses of what the appropriate scale sizes are. This figure illustrates how the scales can be chosen, for a given structure on the sky. 

Type Figure
ID fig_multiscale_example.png
Caption An example set of multiscale 'scale sizes' to choose for a given source structure.

It is recommended that a '0' scale always be included to model unresolved sources. Beyond that, scale sizes should approximately follow the sizes of dominant structures in the image. For structure with very bright and sharp edges, a series of nearby scale sizes works best, often in conjunction with a mask. The largest scale size should be less than or equal to the smaller dimension of large scale features. One must also take care to avoid scale sizes that correspond to the unmeasured short spacings in the central region of uv space, as the reconstruction on these scales will see no constraints from the data and can result in arbitrary values (or divergence). For mosaics of extended emission, it is sometimes possible to use large scale sizes in the minor cycle if there are enough connected structures across pointings, but since there still is no actual short spacing uv data to constrain those scales, they should be used with caution. A reasonable starting point for setting the scales (assuming the cell size samples the mainlobe of the psf by a factor of ~5) is scales=[0,5,15].

Scale Bias

The MS-CLEAN implementation contains a normalization choice that sometimes requires a numerical control to bias the solution towards smaller scales. This is especially useful when very large scale emission is coupled with weak compact features. The parameter that controls this is smallscalebias. The peak from each scale's smoothed residual is multiplied by ( 1 - smallscalebias * scale/maxscale ) to increase or decrease the amplitude relative to other scales, before the scale with the largest peak is chosen.

smallscalebias=0.6 (default) applies a slight bias towards small scales, ranging from 1.0 for a point source to 0.4 for the largest scale size. Values larger than 0.6 will bias the solution towards smaller scales. Values smaller than 0.6 will tend towards giving all scales equal weight. It can be useful to experiment with MS-clean in interactive=True mode. If you notice that bright regions of emission are overcleaned in the first few major cycles (i.e. negative regions will appear in the residual image), it suggests that too much cleaning is happening on the largest scales and it can help to increase the smallscalebias. Additionally, it is often necessary to clean comparatively deeply to reap the full benefit of a multi-scale CLEAN.


Multi-Resolution CLEAN

A related approach, called Multi-Resolution CLEAN is available in AIPS (and not in CASA). It is very similar to MS-CLEAN, although it operates on one scale size at a time. It smoothes the residual image and PSF by a particular scale size, and runs the minor cycle only on that scale. It switches scales after the next major cycle. This algorithm uses a different scale-based normalization (compared to MS-CLEAN) and has its own scalebias parameter which has its own formula. 


Multi-Term (with Multi-Scale)

Multi-Scale Multi-Frequency synthesis (MSMFS) [5] is a wide-band imaging algoorithm that models the wide-band sky brightness distribution as a collection of inverted, tapered paraboloids of different scale sizes, whose amplitudes follow a polynomial in frequency. A linear-least squares approach is used along with standard clean-type iterations to solve for best-fit spectral and spatial parameters. A point-source version of this algorithm can be run by specifying only one scale size corresponding to a delta-function.

Type Figure
ID figconvolutionmt.png
Caption A 2x2 system of equations to represent the fitting of a 2-term Taylor polynomial (Note that this is only a representative diagram using the same images shaded differently). In reality, the Hessian matrix contains different spectral PSFs.

The figure illustrates the set of normal equations that are to be solved in the image domain. What is usually a single convolution is now a joint convolution operator. The images on the left represent Taylor-weighted residual images, the 2x2 matrix contains spectral PSFs (the instruments' responses to spectra given by different Taylor functions), and the model images on the right represent Taylor coefficients per component. (Note : This figure only illustrates the structure of the system of equations.)

More details about the algorithm and how to choose parameters such as the number of Taylor coefficients (nterms) and the reference frequency (reffreq) are given in the Wideband Imaging section.



Standard Restoration

The final list of flux components (or an image containing just the component delta functions) is restored by smoothing it with a Gaussian that matches the resolution of the main lobe of the PSF and adding back the residual image. This step is done in order to compensate for the unphysical nature of CLEAN based component images that include delta functions, and to include residual flux (especially for extended emission) that was not picked up as part of the model image. The need for restoration varies depending on the choice of algorithm but since all our CLEAN-based approaches include delta functions (with or without multi-scale components), this restoration step is always applied.


Multi-term restoration

Multi-term (wideband) restoration is a bit different from standard restoration in that it also modifies the residuals that are added to the smoothed model. Residuals are converted from Taylor-weighted averages of the residual data into Taylor coefficient space such that they represent the 'next higher order term' being imaged (a standard way of represent error). Practical implications of this are a higher than expected rms in the zero-th order image because the higher order terms being fitted have more reconstruction error and are not strictly linearly independent from the zero-th order term. In the outputs of the Multi-Term algorithm, the restored images contain these modified residuals, whereas the residual images contain the unmodified residuals which conform to what astronomers typically mean by 'residual' images. More details about the algorithm are provided in the Wideband Imaging section.


Clean Bias

Clean bias, an effect noticed for decades by users of the CLEAN algorithm, is a systematic shift of reconstructed peak intensities to lower than expected values. This is usually seen in deep imaging runs with large numbers of closely-spaced weak sources, and when the PSF has sidelobes above the 0.1 level. The use of masks or clean boxes to constrain the search space alleviates the problem. A PSF with lower sidelobes (for example the PSF from MFS imaging as compared to a single channel PSF) can also prevent this type of flux bias with the CLEAN algorithm and more importantly it does so without having to invoke complicated masking procedures.

The clean bias effect can be explained by considering that the CLEAN algorithm is an L1-norm basis-pursuit method that is optimized for sparse signals that can be described with a minimal number of basis functions. For astronomical images this implies well-separated point sources whose properties can be described by single basis functions (one pixel each) and whose central peaks are minimally affected by PSF sidelobes from neighbouring sources. In a crowded field of point sources, especially with a PSF with high sidelobes, the CLEAN algorithm is more error-prone in the low SNR regime. A systematic lowering of source brightness can be explained by the algorithm constructing many artificial source components from the sidelobes of real sources.


Other Algorithms

There are other options that are present in our code base, but not used much, could be experimental, coming in the near future, or simply untested. Information on how to add external algorithms is given below.


This algorithm models the sky brightness distribution as a collection of point-sources and uses a prior image along with an entropy-based penalty function to bias the solution of pixel amplitudes. The Maximum Entropy method (MEM) [6] [7] is a pixel-based deconvolution algorithm that performs a rigorously-constrained optimization in a basis of pixel amplitudes. MEM uses the Bayesian formulation of chi-square minimization, and applies a penalty function based on relative image entropy. This choice of penalty function biases the estimate of the true sky brightness towards a known prior image. If a flat image is chosen as the prior, the solution is biased towards being smooth, and produces a more realistic reconstruction of extended emission. Positivity and emptiness constraints can be applied on the image pixels via a penalty function.

The MEM implementation in CASA's imager is unstable, and is unlikely to get attention as there are better methods available now. Please use multi-scale CLEAN instead.


The Adaptive Scale Pixel (ASP) [8] deconvolution algorithm parameterizes the sky brightness distribution into a collection of Gaussians and does a formal constrained optimization on their parameters. In the major cycle, visibilities are predicted analytically with high accuracy. In the minor cycle, the location of a flux component is chosen from the peak residual, and the parameters of the largest Gaussian that fits the image at that location are found. The total number of flux-components is also updated as the iterations proceed.

This algorithm is currently not available in CASA, but is on the mid-term implementation plan. 


Comparison between deconvolution algorithms : One example

Due to the fact that the uv-sampling is always incomplete, the result of a reconstruction algorithm can vary depending on the choice of sky model and the type of algorithm and constraints used. This figure shows a comparison between point-source CLEAN, MS-CLEAN, MEM and the ASP algorithms.

In the figure below, the top row of panels show the component images that illustrate the different sky models being used. The middle row of panels shows restored images (used for the science). It should be noted that they are all different from each other and that they are all valid images. The main difference appears to be the achievable angular resolution. The bottom panels show residual images (gradient of chi-square) which radio astronomers typically use to judge whether all the signal in the data has been modeled or not. These images show how well the different methods handle extended emission. For example, CLEAN results in significant correlated flux in the residuals. MEM does better but the error pattern has significant structure outside the source too. MS-CLEAN has lower residuals than the two previous methods but has a characteristic pattern arising from using a fixed set of scale sizes to model complicated spatial structure. The ASP method shows much more noise-like residuals owing to the fact that at each iteration it finds best-fit components. Most more recent algorithms derived using compressed-sensing theory are reported (in the literature) to produce results similar to the ASP algorithm, as they all also perform fits to parameterized basis functions.



Type Figure
ID Create a short, unique name
Caption A comparison between point-source CLEAN, MS-CLEAN, MEM and the ASP algorithms.


Adding Other Deconvolution algorithms

External deconvolution algorithms can be connected to our imaging framework in order to access our data I/O and gridding routines (with parallelization) and avail of the option of operating within major/minor cycle loops instead of as stand-alone methods that don’t often connect to the data. The only pre-requisite is that the algorithm is able to operate in the image domain on a residual image and a PSF, and produce a model image as output. 

It should be noted that although many recently developed compressed-sensing algorithms do not explicitly make this uv-domain and image-domain distinction, their practical implementations do, and in some cases it is possible to frame the algorithm within a major/minor cycle structure (with residual visibilities being computed as 'data - model'). Another way of saying this is that our software can be used to implement the data->image and image->data transforms, while implementing an external reconstruction algorithm. The only exceptions are algorithms that require the gridding of something other than 'data - model' and which cannot be implemented as linear combinations in the image domain.

Attempts by external algorithm developers to connect to our framework are welcome, as are suggestions for improving this interface to be more usable.

Task Interface

tclean can be used in 'only major cycle' mode by setting niter=0. If calcres=False, calcpsf=False are set, then tclean can be also used to start directly with minor cycle algorithms that pick up .residual and .psf images from disk.

Tool interface

Python scripts can use our PySynthesisImager library to access each operational step of the tclean task, and to add or delete steps as necessary. Examples are given in the tclean task documentation (at the end of the examples page).

Within C++

For C++ programmers, it is possible to connect a new deconvolution algorithm by deriving from SDAlgorithmBase and implementing three main routines (initialization, cleanup, and a 'takeOneStep' method that does the series of minor cycle iterations).


Citation Number 1
Citation Text Schwab and Cotton 1983
Citation Number 2
Citation Text Hogbom 1974
Citation Number 3
Citation Text Clark 1980
Citation Number 4
Citation Text Cornwell 2008
Citation Number 5
Citation Text Rau & Cornwell 2011


Citation Number 6
Citation Text Cornwell and Evans 1985


Citation Number 7
Citation Text Narayan and Nityananda 1986
Citation Number 8
Citation Text Bhatnagar and Cornwell 2004