Line data Source code
1 : #ifndef _ATM_SKYSTATUS_H
2 : #define _ATM_SKYSTATUS_H
3 : /*******************************************************************************
4 : * ALMA - Atacama Large Millimiter Array
5 : * (c) Instituto de Estructura de la Materia, 2009
6 : *
7 : * This library is free software; you can redistribute it and/or
8 : * modify it under the terms of the GNU Lesser General Public
9 : * License as published by the Free Software Foundation; either
10 : * version 2.1 of the License, or (at your option) any later version.
11 : *
12 : * This library is distributed in the hope that it will be useful,
13 : * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 : * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 : * Lesser General Public License for more details.
16 : *
17 : * You should have received a copy of the GNU Lesser General Public
18 : * License along with this library; if not, write to the Free Software
19 : * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 : *
21 : * "@(#) $Id: ATMSkyStatus.h Exp $"
22 : *
23 : * who when what
24 : * -------- -------- ----------------------------------------------
25 : * pardo 24/03/09 created
26 : */
27 :
28 : #ifndef __cplusplus
29 : #error This is a C++ include file and cannot be used from plain C
30 : #endif
31 :
32 : #include "ATMCommon.h"
33 : #include "ATMRefractiveIndexProfile.h"
34 : #include "ATMWaterVaporRadiometer.h"
35 : #include "ATMWVRMeasurement.h"
36 :
37 : //#include <math.h>
38 : #include <string>
39 : #include <vector>
40 :
41 : using std::string;
42 : using std::vector;
43 :
44 : ATM_NAMESPACE_BEGIN
45 :
46 : /*! \brief From the layerThickness and layerTemperature arrays (from AtmProfile),
47 : * the RefractiveIndexProfile array, and a brightness temperature measured to
48 : * the sky at the corresponding frequency, this Class retrieves the water vapor
49 : * column that corresponds to the measurement.
50 : *
51 : * The strating point will therefore be an RefractiveIndexProfile object form
52 : * which the essential information will be inherited: layerThickness,
53 : * layerTemperature vectors (these two inherited themselves from AtmProfile),
54 : * and absTotalDry and absTotalWet arrays. The numerical methods
55 : * will be an iteration wh2o to match the measured brightness temperature
56 : */
57 : class SkyStatus: public RefractiveIndexProfile
58 : {
59 : public:
60 :
61 : //@{
62 :
63 : /** The basic constructor. It will allow to perform forward radiative transfer enquires in
64 : * the spectral bands of refractiveIndexProfile, and to use some of these bands for water vapor retrievals.
65 : * The basic constructor needs at least an RefractiveIndexProfile object (it brings the spectral information via the
66 : * SpectralGrid object inherited by it). Additional inputs can be the
67 : * Air mass (default 1.0), sky background temperature (default 2.73 K), and user water vapor column (default 1 mm).
68 : * Methods inside the class allow to retrieve the water vapor column and eventually update the user value to the retrieved one.
69 : * In order to perform such retrievals, the numerical methods will need as inputs the measured T_EBBs towards the sky in
70 : * some spectral bands that will be designed as water vapor radiometry channels. The sideband gains and coupling to the sky
71 : * of these vapor radiometry channels should also be inputs of the retrieval methods, otherwise they will be set to default
72 : * values. See documentation ef particular methods for more information.
73 : */
74 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile);
75 : /** Class constructor with additional inputs */
76 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
77 : double airMass);
78 : /** Class constructor with additional inputs */
79 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
80 : const Temperature &temperatureBackground);
81 : /** Class constructor with additional inputs */
82 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
83 : const Length &wh2o);
84 : /** Class constructor with additional inputs */
85 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
86 : const Temperature &temperatureBackground,
87 : double airMass);
88 : /** Class constructor with additional inputs */
89 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
90 : double airMass,
91 : const Temperature &temperatureBackground);
92 : /** Class constructor with additional inputs */
93 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
94 : const Length &wh2o,
95 : double airMass);
96 : /** Class constructor with additional inputs */
97 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
98 : double airMass,
99 : const Length &wh2o);
100 : /** Class constructor with additional inputs */
101 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
102 : const Length &wh2o,
103 : const Temperature &temperatureBackground);
104 : /** Class constructor with additional inputs */
105 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
106 : const Temperature &temperatureBackground,
107 : const Length &wh2o);
108 : /** Class constructor with additional inputs */
109 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
110 : const Temperature &temperatureBackground,
111 : double airMass,
112 : const Length &wh2o);
113 : /** Class constructor with additional inputs */
114 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
115 : const Temperature &temperatureBackground,
116 : const Length &wh2o,
117 : double airMass);
118 : /** Class constructor with additional inputs */
119 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
120 : double airMass,
121 : const Temperature &temperatureBackground,
122 : const Length &wh2o);
123 : /** Class constructor with additional inputs */
124 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
125 : double airMass,
126 : const Length &wh2o,
127 : const Temperature &temperatureBackground);
128 : /** Class constructor with additional inputs */
129 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
130 : const Length &wh2o,
131 : const Temperature &temperatureBackground,
132 : double airMass);
133 : /** Class constructor with additional inputs */
134 : SkyStatus(const RefractiveIndexProfile &refractiveIndexProfile,
135 : const Length &wh2o,
136 : double airMass,
137 : const Temperature &temperatureBackground);
138 :
139 : /** A copy constructor for deep copy */
140 : SkyStatus(const SkyStatus &);
141 :
142 : virtual ~SkyStatus();
143 :
144 : //@}
145 :
146 : //@{
147 :
148 :
149 : /** Accessor to get the user water vapor column. This is the water vapor column used for forward
150 : radiative transfer calculations. It can be equal to wh2o_retrieved_ when this one is avalilable
151 : and the proper setter or update accessor (retrieveandupdateWaterVapor) has been used. */
152 9640 : Length getUserWH2O() const { return wh2o_user_; }
153 : /** Setter for user zenith water vapor column for forward radiative transfer calculations. The user
154 : zenith water vapor column equals the retrieved zenith water vapor column from H2O radiometers,
155 : every time the last one is derived with the retrieveandupdateWaterVapor accessor.*/
156 3 : void setUserWH2O(const Length &wh2o)
157 : {
158 3 : if(wh2o.get() == wh2o_user_.get()) {
159 : } else {
160 2 : wh2o_user_ = wh2o;
161 : }
162 3 : }
163 : /** Alternative form of the setter for user zenith water vapor column for forward radiative transfer calculations. The user
164 : zenith water vapor column equals the retrieved zenith water vapor column from H2O radiometers,
165 : every time the last one is derived with the retrieveandupdateWaterVapor accessor.*/
166 2 : void setUserWH2O(double dwh2o, const string &units)
167 : {
168 4 : Length wh2o(dwh2o, units);
169 2 : if(wh2o.get() == wh2o_user_.get()) {
170 : } else {
171 2 : wh2o_user_ = wh2o;
172 : }
173 2 : }
174 : /** Accessor to get airmass */
175 17 : double getAirMass() const { return airMass_; }
176 : /** Setter for air mass in SkyStatus without performing water vapor retrieval */
177 3 : void setAirMass(double airMass)
178 : {
179 3 : if(airMass == airMass_) {
180 : } else {
181 1 : airMass_ = airMass;
182 : }
183 3 : }
184 : /** Accessor to get sky background temperature */
185 : Temperature getSkyBackgroundTemperature() const { return skyBackgroundTemperature_; }
186 : /** Setter for sky background temperature in SkyStatus without
187 : performing water vapor retrieval */
188 : void setSkyBackgroundTemperature(const Temperature &skyBackgroundTemperature)
189 : {
190 : if(skyBackgroundTemperature.get(Temperature::UnitKelvin) == skyBackgroundTemperature_.get(Temperature::UnitKelvin)) {
191 : } else {
192 : skyBackgroundTemperature_
193 : = Temperature(skyBackgroundTemperature.get(Temperature::UnitKelvin), Temperature::UnitKelvin);
194 : }
195 : }
196 :
197 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window 0, for the current conditions
198 : and a perfect sky coupling */
199 2 : Temperature getAverageTebbSky()
200 : {
201 2 : unsigned int n = 0;
202 2 : return getAverageTebbSky(n);
203 : }
204 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window spwid, for the current conditions
205 : and a perfect sky coupling */
206 3 : Temperature getAverageTebbSky(unsigned int spwid)
207 : {
208 : return getAverageTebbSky(spwid,
209 6 : getUserWH2O(),
210 : getAirMass(),
211 : 1.0,
212 9 : getGroundTemperature());
213 : }
214 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window 0, for the current
215 : conditions, except water column wh2o, and a perfect sky coupling */
216 1 : Temperature getAverageTebbSky(const Length &wh2o) { return getAverageTebbSky(0, wh2o); }
217 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window spwid, for the current
218 : conditions, except water column wh2o, and a perfect sky coupling */
219 1 : Temperature getAverageTebbSky(unsigned int spwid, const Length &wh2o)
220 : {
221 : return getAverageTebbSky(spwid,
222 : wh2o,
223 : getAirMass(),
224 : 1.0,
225 1 : getGroundTemperature());
226 : }
227 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window 0, for the current
228 : conditions, except Air Mass airmass, and a perfect sky coupling */
229 : Temperature getAverageTebbSky(double airmass) { return getAverageTebbSky(0, airmass); }
230 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window spwid, for the current
231 : conditions, except Air Mass airmass, and a perfect sky coupling */
232 : Temperature getAverageTebbSky(unsigned int spwid, double airmass)
233 : {
234 : return getAverageTebbSky(spwid,
235 : getUserWH2O(),
236 : airmass,
237 : 1.0,
238 : getGroundTemperature());
239 : }
240 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window 0, for the current
241 : conditions, except water column wh2o, introducing a Sky Coupling and Spill Over Temperature */
242 : Temperature getAverageTebbSky(const Length &wh2o,
243 : double skycoupling,
244 : const Temperature &Tspill)
245 : {
246 : return getAverageTebbSky(0, wh2o, skycoupling, Tspill);
247 : }
248 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window spwid, for the current
249 : conditions, except water column wh2o, introducing a Sky Coupling and Spill Over Temperature */
250 : Temperature getAverageTebbSky(unsigned int spwid,
251 : const Length &wh2o,
252 : double skycoupling,
253 : const Temperature &Tspill)
254 : {
255 : return getAverageTebbSky(spwid, wh2o, getAirMass(), skycoupling, Tspill);
256 : }
257 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window 0, for the current
258 : conditions, except Air Mass airmass, introducing a Sky Coupling and Spill Over Temperature */
259 : Temperature getAverageTebbSky(double airmass,
260 : double skycoupling,
261 : const Temperature &Tspill)
262 : {
263 : return getAverageTebbSky(0, airmass, skycoupling, Tspill);
264 : }
265 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window spwid, for the current
266 : conditions, except Air Mass airmass, introducing a Sky Coupling and Spill Over Temperature */
267 : Temperature getAverageTebbSky(unsigned int spwid,
268 : double airmass,
269 : double skycoupling,
270 : const Temperature &Tspill)
271 : {
272 : return getAverageTebbSky(spwid, getUserWH2O(), airmass, skycoupling, Tspill);
273 : }
274 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window 0 for the current
275 : conditions, introducing a Sky Coupling and Spill Over Temperature */
276 : Temperature getAverageTebbSky(double skycoupling, const Temperature &Tspill)
277 : {
278 : unsigned int n = 0;
279 : return getAverageTebbSky(n, skycoupling, Tspill);
280 : }
281 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window spwid for the current
282 : conditions, introducing a Sky Coupling and Spill Over Temperature */
283 : Temperature getAverageTebbSky(unsigned int spwid,
284 : double skycoupling,
285 : const Temperature &Tspill)
286 : {
287 : return getAverageTebbSky(spwid,
288 : getUserWH2O(),
289 : getAirMass(),
290 : skycoupling,
291 : Tspill);
292 : }
293 : /** Accesor to the average Equivalent Blackbody Temperature in spectral window spwid, for Water Column
294 : wh2o, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
295 : Temperature getAverageTebbSky(unsigned int spwid,
296 : const Length &wh2o,
297 : double airmass,
298 : double skycoupling,
299 : const Temperature &Tspill);
300 :
301 : Temperature getAverageTebbSky(unsigned int spwid,
302 : const Length &wh2o,
303 : double airmass,
304 : double skycoupling,
305 : double signalgain,
306 : const Temperature &Tspill);
307 :
308 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel 0, for the currnet
309 : (user) Water Vapor Column, the current Air Mass, and perfect Sky Coupling to the sky */
310 : Temperature getTebbSky()
311 : {
312 : unsigned int n = 0;
313 : return getTebbSky(n);
314 : }
315 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel nc, for the currnet
316 : (user) Water Vapor Column, the current Air Mass, and perfect Sky Coupling to the sky */
317 10 : Temperature getTebbSky(unsigned int nc) // There was reported a bug at Launchpad:
318 : // that the result did not take into account
319 : // the actual column of water. But it is not true.
320 : // The column of water is taken into account as
321 : // seen in the next accessor, that is referred by this one.
322 : {
323 10 : unsigned int n = 0;
324 10 : return getTebbSky(n, nc);
325 : }
326 : /** Accesor to the Equivalent Blackbody Temperature in spectral window spwid and channel nc, for the currnet
327 : (user) Water Vapor Column, the current Air Mass, and perfect Sky Coupling to the sky */
328 10 : Temperature getTebbSky(unsigned int spwid, unsigned int nc)
329 : {
330 : return getTebbSky(spwid,
331 : nc,
332 20 : getUserWH2O(),
333 : getAirMass(),
334 : 1.0,
335 30 : Temperature(100, Temperature::UnitKelvin));
336 : }
337 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel 0, for the currnet
338 : (user) Water Vapor Column, Air Mass airmass, and perfect Sky Coupling to the sky */
339 : Temperature getTebbSky(double airmass)
340 : {
341 : unsigned int n = 0;
342 : return getTebbSky(n, airmass);
343 : }
344 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel nc, for the currnet
345 : (user) Water Vapor Column, Air Mass airmass, and perfect Sky Coupling to the sky */
346 : Temperature getTebbSky(unsigned int nc, double airmass)
347 : {
348 : unsigned int n = 0;
349 : return getTebbSky(n, nc, airmass);
350 : }
351 : /** Accesor to the Equivalent Blackbody Temperature in spectral window spwid and channel nc, for the currnet
352 : (user) Water Vapor Column, Air Mass airmass, and perfect Sky Coupling to the sky */
353 : Temperature getTebbSky(unsigned int spwid, unsigned int nc, double airmass)
354 : {
355 : return getTebbSky(spwid, nc, getUserWH2O(), airmass, 1.0, Temperature(100,
356 : Temperature::UnitKelvin));
357 : }
358 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel 0, for Water
359 : Vapor Column wh2o, the current Air Mass, and perfect Sky Coupling to the sky */
360 : Temperature getTebbSky(const Length &wh2o)
361 : {
362 : unsigned int n = 0;
363 : return getTebbSky(n, wh2o);
364 : }
365 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel nc, for Water
366 : Vapor Column wh2o, the current Air Mass, and perfect Sky Coupling to the sky */
367 : Temperature getTebbSky(unsigned int nc, const Length &wh2o)
368 : {
369 : unsigned int n = 0;
370 : return getTebbSky(n, nc, wh2o);
371 : }
372 : /** Accesor to the Equivalent Blackbody Temperature in spectral window spwid and channel nc, for Water
373 : Vapor Column wh2o, the current Air Mass, and perfect Sky Coupling to the sky */
374 : Temperature getTebbSky(unsigned int spwid, unsigned int nc, const Length &wh2o)
375 : {
376 : return getTebbSky(spwid, nc, wh2o, getAirMass(), 1.0, Temperature(100, Temperature::UnitKelvin));
377 : }
378 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel nc, for the current
379 : (user) Water Vapor Column and Air Mass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
380 : Temperature getTebbSky(unsigned int nc,
381 : double skycoupling,
382 : const Temperature &Tspill)
383 : {
384 : unsigned int n = 0;
385 : return getTebbSky(n, nc, skycoupling, Tspill);
386 : }
387 : /** Accesor to the Equivalent Blackbody Temperature in spectral window spwid and channel nc, for the current
388 : (user) Water Vapor Column and Air Mass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
389 : Temperature getTebbSky(unsigned int spwid,
390 : unsigned int nc,
391 : double skycoupling,
392 : const Temperature &Tspill)
393 : {
394 : return getTebbSky(spwid,
395 : nc,
396 : getUserWH2O(),
397 : getAirMass(),
398 : skycoupling,
399 : Tspill);
400 : }
401 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel nc, for Water
402 : Vapor Column wh2o, Air Mass airmass, and perfect Sky Coupling to the sky */
403 : Temperature getTebbSky(unsigned int nc, const Length &wh2o, double airmass)
404 : {
405 : unsigned int n = 0;
406 : return getTebbSky(n, nc, wh2o, airmass);
407 : }
408 : /** Accesor to the Equivalent Blackbody Temperature in spectral window spwid and channel nc, for Water
409 : Vapor Column wh2o, Air Mass airmass, and perfect Sky Coupling to the sky */
410 : Temperature getTebbSky(unsigned int spwid,
411 : unsigned int nc,
412 : const Length &wh2o,
413 : double airmass)
414 : {
415 : return getTebbSky(spwid, nc, wh2o, airmass, 1.0, Temperature(100, Temperature::UnitKelvin));
416 : }
417 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel nc, for Water
418 : Vapor Column wh2o, the current Air Mass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
419 : Temperature getTebbSky(unsigned int nc,
420 : const Length &wh2o,
421 : double skycoupling,
422 : const Temperature &Tspill)
423 : {
424 : unsigned int n = 0;
425 : return getTebbSky(n, nc, wh2o, skycoupling, Tspill);
426 : }
427 : /** Accesor to the Equivalent Blackbody Temperature in spectral window spwid and channel nc, for Water
428 : Vapor Column wh2o, the current Air Mass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
429 : Temperature getTebbSky(unsigned int spwid,
430 : unsigned int nc,
431 : const Length &wh2o,
432 : double skycoupling,
433 : const Temperature &Tspill)
434 : {
435 : return getTebbSky(spwid, nc, wh2o, getAirMass(), skycoupling, Tspill);
436 : }
437 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel nc, for the current
438 : User Water Column, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
439 : Temperature getTebbSky(unsigned int nc,
440 : double airmass,
441 : double skycoupling,
442 : const Temperature &Tspill)
443 : {
444 : unsigned int n = 0;
445 : return getTebbSky(n, nc, airmass, skycoupling, Tspill);
446 : }
447 : /** Accesor to the Equivalent Blackbody Temperature in spectral window spwid and channel nc, for the current
448 : User Water Column, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
449 : Temperature getTebbSky(unsigned int spwid,
450 : unsigned int nc,
451 : double airmass,
452 : double skycoupling,
453 : const Temperature &Tspill)
454 : {
455 : return getTebbSky(spwid, nc, getUserWH2O(), airmass, skycoupling, Tspill);
456 : }
457 : /** Accesor to the Equivalent Blackbody Temperature in spectral window 0 and channel nc, for Water Column
458 : wh2o, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
459 : Temperature getTebbSky(unsigned int nc,
460 : const Length &wh2o,
461 : double airmass,
462 : double skycoupling,
463 : const Temperature &Tspill)
464 : {
465 : unsigned int n = 0;
466 : return getTebbSky(n, nc, wh2o, airmass, skycoupling, Tspill);
467 : }
468 : /** Accesor to the Equivalent Blackbody Temperature in spectral window spwid and channel nc, for Water Column
469 : wh2o, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
470 : Temperature getTebbSky(unsigned int spwid,
471 : unsigned int nc,
472 : const Length &wh2o,
473 : double airmass,
474 : double skycoupling,
475 : const Temperature &Tspill);
476 :
477 :
478 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window 0, for the current conditions
479 : and a perfect sky coupling */
480 : Temperature getAverageTrjSky()
481 : {
482 : unsigned int n = 0;
483 : return getAverageTrjSky(n);
484 : }
485 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window spwid, for the current conditions
486 : and a perfect sky coupling */
487 : Temperature getAverageTrjSky(unsigned int spwid)
488 : {
489 : return getAverageTrjSky(spwid,
490 : getUserWH2O(),
491 : getAirMass(),
492 : 1.0,
493 : getGroundTemperature());
494 : }
495 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window 0, for the current
496 : conditions, except water column wh2o, and a perfect sky coupling */
497 : Temperature getAverageTrjSky(const Length &wh2o) { return getAverageTrjSky(0, wh2o); }
498 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window spwid, for the current
499 : conditions, except water column wh2o, and a perfect sky coupling */
500 : Temperature getAverageTrjSky(unsigned int spwid, const Length &wh2o)
501 : {
502 : return getAverageTrjSky(spwid,
503 : wh2o,
504 : getAirMass(),
505 : 1.0,
506 : getGroundTemperature());
507 : }
508 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window 0, for the current
509 : conditions, except Air Mass airmass, and a perfect sky coupling */
510 : Temperature getAverageTrjSky(double airmass) { return getAverageTrjSky(0, airmass); }
511 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window spwid, for the current
512 : conditions, except Air Mass airmass, and a perfect sky coupling */
513 : Temperature getAverageTrjSky(unsigned int spwid, double airmass)
514 : {
515 : return getAverageTrjSky(spwid,
516 : getUserWH2O(),
517 : airmass,
518 : 1.0,
519 : getGroundTemperature());
520 : }
521 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window 0, for the current
522 : conditions, except water column wh2o, introducing a Sky Coupling and Spill Over Temperature */
523 : Temperature getAverageTrjSky(const Length &wh2o,
524 : double skycoupling,
525 : const Temperature &Tspill)
526 : {
527 : return getAverageTrjSky(0, wh2o, skycoupling, Tspill);
528 : }
529 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window spwid, for the current
530 : conditions, except water column wh2o, introducing a Sky Coupling and Spill Over Temperature */
531 : Temperature getAverageTrjSky(unsigned int spwid,
532 : const Length &wh2o,
533 : double skycoupling,
534 : const Temperature &Tspill)
535 : {
536 : return getAverageTrjSky(spwid, wh2o, getAirMass(), skycoupling, Tspill);
537 : }
538 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window 0, for the current
539 : conditions, except Air Mass airmass, introducing a Sky Coupling and Spill Over Temperature */
540 : Temperature getAverageTrjSky(double airmass,
541 : double skycoupling,
542 : const Temperature &Tspill)
543 : {
544 : return getAverageTrjSky(0, airmass, skycoupling, Tspill);
545 : }
546 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window spwid, for the current
547 : conditions, except Air Mass airmass, introducing a Sky Coupling and Spill Over Temperature */
548 : Temperature getAverageTrjSky(unsigned int spwid,
549 : double airmass,
550 : double skycoupling,
551 : const Temperature &Tspill)
552 : {
553 : return getAverageTrjSky(spwid, getUserWH2O(), airmass, skycoupling, Tspill);
554 : }
555 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window 0 for the current
556 : conditions, introducing a Sky Coupling and Spill Over Temperature */
557 : Temperature getAverageTrjSky(double skycoupling, const Temperature &Tspill)
558 : {
559 : unsigned int n = 0;
560 : return getAverageTrjSky(n, skycoupling, Tspill);
561 : }
562 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window spwid for the current
563 : conditions, introducing a Sky Coupling and Spill Over Temperature */
564 : Temperature getAverageTrjSky(unsigned int spwid,
565 : double skycoupling,
566 : const Temperature &Tspill)
567 : {
568 : return getAverageTrjSky(spwid,
569 : getUserWH2O(),
570 : getAirMass(),
571 : skycoupling,
572 : Tspill);
573 : }
574 : /** Accesor to the average Rayleigh-Jeans Temperature in spectral window spwid, for Water Column
575 : wh2o, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
576 : Temperature getAverageTrjSky(unsigned int spwid,
577 : const Length &wh2o,
578 : double airmass,
579 : double skycoupling,
580 : const Temperature &Tspill);
581 :
582 : Temperature getAverageTrjSky(unsigned int spwid,
583 : const Length &wh2o,
584 : double airmass,
585 : double skycoupling,
586 : double signalgain,
587 : const Temperature &Tspill);
588 :
589 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel 0, for the currnet
590 : (user) Water Vapor Column, the current Air Mass, and perfect Sky Coupling to the sky */
591 : Temperature getTrjSky()
592 : {
593 : unsigned int n = 0;
594 : return getTrjSky(n);
595 : }
596 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel nc, for the currnet
597 : (user) Water Vapor Column, the current Air Mass, and perfect Sky Coupling to the sky */
598 0 : Temperature getTrjSky(unsigned int nc) // There was reported a bug at Launchpad:
599 : // that the result did not take into account
600 : // the actual column of water. But it is not true.
601 : // The column of water is taken into account as
602 : // seen in the next accessor, that is referred by this one.
603 : {
604 0 : unsigned int n = 0;
605 0 : return getTrjSky(n, nc);
606 : }
607 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window spwid and channel nc, for the currnet
608 : (user) Water Vapor Column, the current Air Mass, and perfect Sky Coupling to the sky */
609 0 : Temperature getTrjSky(unsigned int spwid, unsigned int nc)
610 : {
611 : return getTrjSky(spwid,
612 : nc,
613 0 : getUserWH2O(),
614 : getAirMass(),
615 : 1.0,
616 0 : Temperature(100, Temperature::UnitKelvin));
617 : }
618 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel 0, for the currnet
619 : (user) Water Vapor Column, Air Mass airmass, and perfect Sky Coupling to the sky */
620 : Temperature getTrjSky(double airmass)
621 : {
622 : unsigned int n = 0;
623 : return getTrjSky(n, airmass);
624 : }
625 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel nc, for the currnet
626 : (user) Water Vapor Column, Air Mass airmass, and perfect Sky Coupling to the sky */
627 : Temperature getTrjSky(unsigned int nc, double airmass)
628 : {
629 : unsigned int n = 0;
630 : return getTrjSky(n, nc, airmass);
631 : }
632 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window spwid and channel nc, for the currnet
633 : (user) Water Vapor Column, Air Mass airmass, and perfect Sky Coupling to the sky */
634 : Temperature getTrjSky(unsigned int spwid, unsigned int nc, double airmass)
635 : {
636 : return getTrjSky(spwid, nc, getUserWH2O(), airmass, 1.0, Temperature(100,
637 : Temperature::UnitKelvin));
638 : }
639 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel 0, for Water
640 : Vapor Column wh2o, the current Air Mass, and perfect Sky Coupling to the sky */
641 : Temperature getTrjSky(const Length &wh2o)
642 : {
643 : unsigned int n = 0;
644 : return getTrjSky(n, wh2o);
645 : }
646 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel nc, for Water
647 : Vapor Column wh2o, the current Air Mass, and perfect Sky Coupling to the sky */
648 : Temperature getTrjSky(unsigned int nc, const Length &wh2o)
649 : {
650 : unsigned int n = 0;
651 : return getTrjSky(n, nc, wh2o);
652 : }
653 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window spwid and channel nc, for Water
654 : Vapor Column wh2o, the current Air Mass, and perfect Sky Coupling to the sky */
655 : Temperature getTrjSky(unsigned int spwid, unsigned int nc, const Length &wh2o)
656 : {
657 : return getTrjSky(spwid, nc, wh2o, getAirMass(), 1.0, Temperature(100, Temperature::UnitKelvin));
658 : }
659 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel nc, for the current
660 : (user) Water Vapor Column and Air Mass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
661 : Temperature getTrjSky(unsigned int nc,
662 : double skycoupling,
663 : const Temperature &Tspill)
664 : {
665 : unsigned int n = 0;
666 : return getTrjSky(n, nc, skycoupling, Tspill);
667 : }
668 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window spwid and channel nc, for the current
669 : (user) Water Vapor Column and Air Mass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
670 : Temperature getTrjSky(unsigned int spwid,
671 : unsigned int nc,
672 : double skycoupling,
673 : const Temperature &Tspill)
674 : {
675 : return getTrjSky(spwid,
676 : nc,
677 : getUserWH2O(),
678 : getAirMass(),
679 : skycoupling,
680 : Tspill);
681 : }
682 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel nc, for Water
683 : Vapor Column wh2o, Air Mass airmass, and perfect Sky Coupling to the sky */
684 : Temperature getTrjSky(unsigned int nc, const Length &wh2o, double airmass)
685 : {
686 : unsigned int n = 0;
687 : return getTrjSky(n, nc, wh2o, airmass);
688 : }
689 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window spwid and channel nc, for Water
690 : Vapor Column wh2o, Air Mass airmass, and perfect Sky Coupling to the sky */
691 : Temperature getTrjSky(unsigned int spwid,
692 : unsigned int nc,
693 : const Length &wh2o,
694 : double airmass)
695 : {
696 : return getTrjSky(spwid, nc, wh2o, airmass, 1.0, Temperature(100, Temperature::UnitKelvin));
697 : }
698 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel nc, for Water
699 : Vapor Column wh2o, the current Air Mass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
700 : Temperature getTrjSky(unsigned int nc,
701 : const Length &wh2o,
702 : double skycoupling,
703 : const Temperature &Tspill)
704 : {
705 : unsigned int n = 0;
706 : return getTrjSky(n, nc, wh2o, skycoupling, Tspill);
707 : }
708 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window spwid and channel nc, for Water
709 : Vapor Column wh2o, the current Air Mass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
710 : Temperature getTrjSky(unsigned int spwid,
711 : unsigned int nc,
712 : const Length &wh2o,
713 : double skycoupling,
714 : const Temperature &Tspill)
715 : {
716 : return getTrjSky(spwid, nc, wh2o, getAirMass(), skycoupling, Tspill);
717 : }
718 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel nc, for the current
719 : User Water Column, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
720 : Temperature getTrjSky(unsigned int nc,
721 : double airmass,
722 : double skycoupling,
723 : const Temperature &Tspill)
724 : {
725 : unsigned int n = 0;
726 : return getTrjSky(n, nc, airmass, skycoupling, Tspill);
727 : }
728 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window spwid and channel nc, for the current
729 : User Water Column, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
730 : Temperature getTrjSky(unsigned int spwid,
731 : unsigned int nc,
732 : double airmass,
733 : double skycoupling,
734 : const Temperature &Tspill)
735 : {
736 : return getTrjSky(spwid, nc, getUserWH2O(), airmass, skycoupling, Tspill);
737 : }
738 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window 0 and channel nc, for Water Column
739 : wh2o, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
740 : Temperature getTrjSky(unsigned int nc,
741 : const Length &wh2o,
742 : double airmass,
743 : double skycoupling,
744 : const Temperature &Tspill)
745 : {
746 : unsigned int n = 0;
747 : return getTrjSky(n, nc, wh2o, airmass, skycoupling, Tspill);
748 : }
749 : /** Accesor to the Rayleigh-Jeans Temperature in spectral window spwid and channel nc, for Water Column
750 : wh2o, Air Mass airmass, Sky Coupling skycoupling, and Spill Over Temperature Tspill */
751 : Temperature getTrjSky(unsigned int spwid,
752 : unsigned int nc,
753 : const Length &wh2o,
754 : double airmass,
755 : double skycoupling,
756 : const Temperature &Tspill);
757 :
758 :
759 : /** Accesor to get the integrated zenith Wet Opacity for the current conditions, for a single
760 : frequency RefractiveIndexProfile object or for the point 0 of spectral window 0 of a
761 : multi-window RefractiveIndexProfile object.
762 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
763 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
764 : Opacity getWetOpacity(){unsigned int n = 0; return getWetOpacity(n);}
765 : Opacity getWetOpacityUpTo(Length refalti){unsigned int n = 0; return getWetOpacityUpTo(n, refalti);}
766 : /** Accesor to get the integrated zenith Wet Opacity for the current conditions,
767 : for the point nc of spectral window 0.
768 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
769 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
770 11 : Opacity getWetOpacity(unsigned int nc){return getH2OLinesOpacity(nc) + getH2OContOpacity(nc);}
771 : Opacity getWetOpacityUpTo(unsigned int nc, Length refalti){return getH2OLinesOpacityUpTo(nc, refalti) + getH2OContOpacityUpTo(nc, refalti);}
772 : /** Accesor to get the integrated zenith Wet Opacity for the current conditions,
773 : for the point nc of spectral window spwid.
774 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
775 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
776 0 : Opacity getWetOpacity(unsigned int spwid, unsigned int nc)
777 : {
778 0 : if(!spwidAndIndexAreValid(spwid, nc)) return (double) -999.0;
779 0 : return getWetOpacity(v_transfertId_[spwid] + nc);
780 : }
781 : Opacity getWetOpacityUpTo(unsigned int spwid, unsigned int nc, Length refalti)
782 : {
783 : if(!spwidAndIndexAreValid(spwid, nc)) return (double) -999.0;
784 : return getWetOpacityUpTo(v_transfertId_[spwid] + nc, refalti);
785 : }
786 : /** Accesor to get the average Wet Opacity for the current conditions,
787 : in spectral window spwid.
788 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
789 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
790 : Opacity getAverageWetOpacity(unsigned int spwid)
791 : {
792 : return RefractiveIndexProfile::getAverageWetOpacity(getGroundWH2O(),spwid)
793 : * ((getUserWH2O().get()) / (getGroundWH2O().get()));
794 : }
795 : Opacity getAverageH2OLinesOpacity(unsigned int spwid)
796 : {
797 : return RefractiveIndexProfile::getAverageH2OLinesOpacity(getGroundWH2O(),spwid)
798 : * ((getUserWH2O().get()) / (getGroundWH2O().get()));
799 : }
800 : Opacity getAverageH2OContOpacity(unsigned int spwid)
801 : {
802 : return RefractiveIndexProfile::getAverageH2OContOpacity(getGroundWH2O(),spwid)
803 : * ((getUserWH2O().get()) / (getGroundWH2O().get()));
804 : }
805 :
806 : Opacity getDryOpacity()
807 : {
808 : return RefractiveIndexProfile::getDryOpacity();
809 : }
810 11 : Opacity getDryOpacity(unsigned int nc)
811 : {
812 11 : return RefractiveIndexProfile::getDryOpacity(nc);
813 : }
814 0 : Opacity getDryOpacity(unsigned int spwid, unsigned int nc)
815 : {
816 0 : return RefractiveIndexProfile::getDryOpacity(spwid, nc);
817 : }
818 : Opacity getAverageDryOpacity(unsigned int spwid)
819 : {
820 : return RefractiveIndexProfile::getAverageDryOpacity(spwid);
821 : }
822 :
823 : Opacity getAverageO2LinesOpacity(unsigned int spwid)
824 : {
825 : return RefractiveIndexProfile::getAverageO2LinesOpacity(spwid);
826 : }
827 : Opacity getAverageO3LinesOpacity(unsigned int spwid)
828 : {
829 : return RefractiveIndexProfile::getAverageO3LinesOpacity(spwid);
830 : }
831 : Opacity getAverageN2OLinesOpacity(unsigned int spwid)
832 : {
833 : return RefractiveIndexProfile::getAverageN2OLinesOpacity(spwid);
834 : }
835 : Opacity getAverageNO2LinesOpacity(unsigned int spwid)
836 : {
837 : return RefractiveIndexProfile::getAverageNO2LinesOpacity(spwid);
838 : }
839 : Opacity getAverageSO2LinesOpacity(unsigned int spwid)
840 : {
841 : return RefractiveIndexProfile::getAverageSO2LinesOpacity(spwid);
842 : }
843 : Opacity getAverageCOLinesOpacity(unsigned int spwid)
844 : {
845 : return RefractiveIndexProfile::getAverageCOLinesOpacity(spwid);
846 : }
847 : Opacity getAverageDryContOpacity(unsigned int spwid)
848 : {
849 : return RefractiveIndexProfile::getAverageDryContOpacity(spwid);
850 : }
851 :
852 : Opacity getTotalOpacity()
853 : {
854 : return getWetOpacity() + getDryOpacity();
855 : }
856 5 : Opacity getTotalOpacity(unsigned int nc)
857 : {
858 5 : return getWetOpacity(nc) + getDryOpacity(nc);
859 : }
860 : Opacity getTotalOpacity(unsigned int spwid, unsigned int nc)
861 : {
862 : return getWetOpacity(spwid, nc) + getDryOpacity(spwid, nc);
863 : }
864 : Opacity getAverageTotalOpacity(unsigned int spwid)
865 : {
866 : return getAverageWetOpacity(spwid) + getAverageDryOpacity(spwid);
867 : }
868 : Opacity getTotalOpacityUpTo(Length refalti)
869 : {
870 : unsigned int n = 0;
871 : return getTotalOpacityUpTo(n, refalti);
872 : }
873 : // Opacity getTotalOpacityUpTo(unsigned int nc, Length refalti);
874 : Opacity getTotalOpacityUpTo(unsigned int nc, Length refalti)
875 : {
876 : return getWetOpacityUpTo(nc,refalti) + getDryOpacityUpTo(nc,refalti);
877 : }
878 : Opacity getTotalOpacityUpTo(unsigned int spwid, unsigned int nc, Length refalti)
879 : {
880 : Opacity wrongOp(-999.0,Opacity::UnitNeper);
881 : if(!spwidAndIndexAreValid(spwid, nc)) return wrongOp;
882 : return getTotalOpacityUpTo(v_transfertId_[spwid] + nc, refalti);
883 : }
884 : /** Accesor to get the integrated zenith H2O Lines Opacity for the current conditions,
885 : for a single frequency RefractiveIndexProfile object or for the point 0 of spectral
886 : window 0 of a multi-window RefractiveIndexProfile object.
887 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
888 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
889 : Opacity getH2OLinesOpacity(){ unsigned int n = 0; return getH2OLinesOpacity(n);}
890 : Opacity getH2OLinesOpacityUpTo(Length refalti){ unsigned int n = 0; return getH2OLinesOpacityUpTo(n, refalti);}
891 : /** Accesor to get the integrated zenith H2O Lines Opacity for the current conditions,
892 : for the point nc of spectral window 0.
893 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
894 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
895 : Opacity getH2OLinesOpacity(unsigned int nc);
896 : Opacity getH2OLinesOpacityUpTo(unsigned int nc, Length refalti);
897 : /** Accesor to get the integrated zenith H2O Lines Opacity for the current conditions,
898 : for the point nc of spectral window spwid.
899 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
900 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
901 : Opacity getH2OLinesOpacity(unsigned int spwid, unsigned int nc){ if(!spwidAndIndexAreValid(spwid, nc)) return (double) -999.0; return getH2OLinesOpacity(v_transfertId_[spwid] + nc);}
902 : Opacity getH2OLinesOpacityUpTo(unsigned int spwid, unsigned int nc, Length refalti){ if(!spwidAndIndexAreValid(spwid, nc)) return (double) -999.0; return getH2OLinesOpacityUpTo(v_transfertId_[spwid] + nc, refalti);}
903 : /** Accesor to get the integrated zenith H2O Continuum Opacity for the current conditions,
904 : for a single frequency RefractiveIndexProfile object or for the point 0 of spectral
905 : window 0 of a multi-window RefractiveIndexProfile object.
906 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
907 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
908 : Opacity getH2OContOpacity(){unsigned int n = 0; return getH2OContOpacity(n);}
909 : Opacity getH2OContOpacityUpTo(Length refalti){unsigned int n = 0; return getH2OContOpacityUpTo(n, refalti);}
910 : /** Accesor to get the integrated zenith H2O Continuum Opacity for the current conditions,
911 : for the point nc of spectral window 0.
912 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
913 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
914 : Opacity getH2OContOpacity(unsigned int nc);
915 : Opacity getH2OContOpacityUpTo(unsigned int nc, Length refalti);
916 : /** Accesor to get the integrated zenith H2O Continuum Opacity for the current conditions,
917 : for the point nc of spectral window spwid.
918 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
919 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
920 : Opacity getH2OContOpacity(unsigned int spwid, unsigned int nc){ if(!spwidAndIndexAreValid(spwid, nc)) return (double) -999.0; return getH2OContOpacity(v_transfertId_[spwid] + nc);}
921 : Opacity getH2OContOpacityUpTo(unsigned int spwid, unsigned int nc, Length refalti){ if(!spwidAndIndexAreValid(spwid, nc)) return (double) -999.0; return getH2OContOpacityUpTo(v_transfertId_[spwid] + nc, refalti);}
922 : /** Accesor to get the integrated zenith H2O Atmospheric Phase Delay (Dispersive part)
923 : for the current conditions, for a single frequency RefractiveIndexProfile object or
924 : for the point 0 of spectral window 0 of a multi-window RefractiveIndexProfile object.
925 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
926 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
927 : Angle getDispersiveH2OPhaseDelay()
928 : {
929 : unsigned int n = 0;
930 : return getDispersiveH2OPhaseDelay(n);
931 : }
932 : /** Accesor to get the integrated zenith H2O Atmospheric Phase Delay (Dispersive part)
933 : for the current conditions, for a single frequency RefractiveIndexProfile object or
934 : for the point nc of spectral window 0.
935 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
936 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
937 : Angle getDispersiveH2OPhaseDelay(unsigned int nc);
938 : /** Accesor to get the integrated zenith H2O Atmospheric Phase Delay (Dispersive part)
939 : for the current conditions, for a single frequency RefractiveIndexProfile object or
940 : for the point nc of spectral window spwid.
941 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
942 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
943 : Angle getDispersiveH2OPhaseDelay(unsigned int spwid, unsigned int nc);
944 :
945 : /** Accesor to get the integrated zenith H2O Atmospheric Path length (Dispersive part)
946 : for the current conditions, for a single frequency RefractiveIndexProfile object or
947 : for the point 0 of spectral window 0 of a multi-window RefractiveIndexProfile object.
948 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
949 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
950 : Length getDispersiveH2OPathLength()
951 : {
952 : unsigned int n = 0;
953 : return getDispersiveH2OPathLength(n);
954 : }
955 : /** Accesor to get the integrated zenith H2O Atmospheric Path length (Dispersive part)
956 : for the current conditions, for a single frequency RefractiveIndexProfile object or
957 : for the point nc of spectral window 0.
958 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
959 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
960 : Length getDispersiveH2OPathLength(unsigned int nc);
961 : /** Accesor to get the integrated zenith H2O Atmospheric Path length (Dispersive part)
962 : for the current conditions, for a single frequency RefractiveIndexProfile object or
963 : for the point nc of spectral window spwid.
964 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
965 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
966 : Length getDispersiveH2OPathLength(unsigned int spwid, unsigned int nc);
967 :
968 : /** Accesor to get the integrated zenith H2O Atmospheric Phase Delay (Non-Dispersive part)
969 : for the current conditions, for a single frequency RefractiveIndexProfile object or
970 : for the point 0 of spectral window 0 of a multi-window RefractiveIndexProfile object.
971 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
972 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
973 : Angle getNonDispersiveH2OPhaseDelay()
974 : {
975 : unsigned int n = 0;
976 : return getNonDispersiveH2OPhaseDelay(n);
977 : }
978 : /** Accesor to get the integrated zenith H2O Atmospheric Phase Delay (Non-Dispersive part)
979 : for the current conditions, for a single frequency RefractiveIndexProfile object or
980 : for the point nc of spectral window 0.
981 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
982 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
983 : Angle getNonDispersiveH2OPhaseDelay(unsigned int nc);
984 : /** Accesor to get the integrated zenith H2O Atmospheric Phase Delay (Non-Dispersive part)
985 : for the current conditions, for a single frequency RefractiveIndexProfile object or
986 : for the point nc of spectral window spwid.
987 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
988 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
989 : Angle getNonDispersiveH2OPhaseDelay(unsigned int spwid, unsigned int nc);
990 :
991 : /** Accesor to get the integrated zenith H2O Atmospheric Path length (Non-Dispersive part)
992 : for the current conditions, for a single frequency RefractiveIndexProfile object or
993 : for the point 0 of spectral window 0 of a multi-window RefractiveIndexProfile object.
994 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
995 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
996 : Length getNonDispersiveH2OPathLength()
997 : {
998 : unsigned int n = 0;
999 : return getNonDispersiveH2OPathLength(n);
1000 : }
1001 : /** Accesor to get the integrated zenith H2O Atmospheric Path length (Non-Dispersive part)
1002 : for the current conditions, for a single frequency RefractiveIndexProfile object or
1003 : for the point nc of spectral window 0.
1004 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1005 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1006 : Length getNonDispersiveH2OPathLength(unsigned int nc);
1007 : /** Accesor to get the integrated zenith H2O Atmospheric Path length (Non-Dispersive part)
1008 : for the current conditions, for a single frequency RefractiveIndexProfile object or
1009 : for the point nc of spectral window spwid.
1010 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1011 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1012 : Length getNonDispersiveH2OPathLength(unsigned int spwid, unsigned int nc);
1013 :
1014 : /** Accessor to get the average integrated zenith Atmospheric Phase Delay (Dispersive part)
1015 : for the current conditions in spectral Window spwid.
1016 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1017 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1018 : Angle getAverageDispersiveH2OPhaseDelay(unsigned int spwid);
1019 : /** Accessor to get the average integrated zenith Atmospheric Phase Delay (Dispersive part)
1020 : for the current conditions in spectral Window 0.
1021 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1022 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1023 : Angle getAverageDispersiveH2OPhaseDelay()
1024 : {
1025 : unsigned int n = 0;
1026 : return getAverageDispersiveH2OPhaseDelay(n);
1027 : }
1028 : /** Accessor to get the average integrated zenith Atmospheric Phase Delay (Non-Dispersive
1029 : part) in spectral Window spwid.
1030 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1031 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1032 : Angle getAverageNonDispersiveH2OPhaseDelay(unsigned int spwid);
1033 : /** Accessor to get the average integrated zenith Atmospheric Phase Delay (Non-Dispersive
1034 : part) in spectral Window 0.
1035 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1036 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1037 : Angle getAverageNonDispersiveH2OPhaseDelay()
1038 : {
1039 : unsigned int n = 0;
1040 : return getAverageNonDispersiveH2OPhaseDelay(n);
1041 : }
1042 :
1043 : /** Accessor to get the average integrated zenith Atmospheric Path Length (Dispersive part)
1044 : in spectral Window spwid.
1045 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1046 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1047 : Length getAverageDispersiveH2OPathLength(unsigned int spwid);
1048 : /** Accessor to get the average integrated zenith Atmospheric Path Length (Dispersive part)
1049 : in spectral Window 0.
1050 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1051 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1052 : Length getAverageDispersiveH2OPathLength()
1053 : {
1054 : unsigned int n = 0;
1055 : return getAverageDispersiveH2OPathLength(n);
1056 : }
1057 : /** Accessor to get the average integrated zenith Atmospheric Path Length (Non-Dispersive
1058 : part) in spectral Window spwid.
1059 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1060 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1061 : Length getAverageNonDispersiveH2OPathLength(unsigned int spwid);
1062 : /** Accessor to get the average integrated zenith Atmospheric Path Length (Non-Dispersive
1063 : part) in spectral Window 0.
1064 : There is overloading. The same accessor exists in RefractiveIndexProfile but in that
1065 : case the returned value corresponds to the zenith water vapor column of the AtmProfile object.*/
1066 : Length getAverageNonDispersiveH2OPathLength()
1067 : {
1068 : unsigned int n = 0;
1069 : return getAverageNonDispersiveH2OPathLength(n);
1070 : }
1071 :
1072 240 : Length getAverageH2OPathLength(unsigned int spwid)
1073 : {
1074 480 : return getAverageDispersiveH2OPathLength(spwid)
1075 720 : + getAverageNonDispersiveH2OPathLength(spwid);
1076 : }
1077 : Length getAverageH2OPathLength()
1078 : {
1079 : unsigned int n = 0;
1080 : return getAverageH2OPathLength(n);
1081 : }
1082 : double getAverageH2OPathLengthDerivative(unsigned int spwid)
1083 : {
1084 : return getAverageH2OPathLength(spwid).get(Length::UnitMicrons)
1085 : / getUserWH2O().get(Length::UnitMicrons);
1086 : } // in microns/micron_H2O
1087 : double getAverageH2OPathLengthDerivative()
1088 : {
1089 : unsigned int n = 0;
1090 : return getAverageH2OPathLengthDerivative(n);
1091 : } // in microns/micron_H2O
1092 :
1093 :
1094 : Angle getAverageH2OPhaseDelay(unsigned int spwid)
1095 : {
1096 : return getAverageDispersiveH2OPhaseDelay(spwid)
1097 : + getAverageNonDispersiveH2OPhaseDelay(spwid);
1098 : }
1099 : Angle getAverageH2OPhaseDelay()
1100 : {
1101 : unsigned int n = 0;
1102 : return getAverageH2OPhaseDelay(n);
1103 : }
1104 :
1105 240 : Length getAverageDispersiveDryPathLength(unsigned int spwid)
1106 : {
1107 240 : return getAverageO2LinesPathLength(spwid)
1108 720 : + getAverageO3LinesPathLength(spwid)
1109 960 : + getAverageN2OLinesPathLength(spwid)
1110 960 : + getAverageCOLinesPathLength(spwid)
1111 960 : + getAverageNO2LinesPathLength(spwid)
1112 720 : + getAverageSO2LinesPathLength(spwid);
1113 : }
1114 : Length getAverageDispersiveDryPathLength()
1115 : {
1116 : unsigned int n = 0;
1117 : return getAverageDispersiveDryPathLength(n);
1118 : }
1119 :
1120 240 : Length getAverageNonDispersiveDryPathLength(unsigned int spwid)
1121 : {
1122 240 : return RefractiveIndexProfile::getAverageNonDispersiveDryPathLength(spwid);
1123 : }
1124 : Length getAverageNonDispersiveDryPathLength()
1125 : {
1126 : unsigned int n = 0;
1127 : return getAverageNonDispersiveDryPathLength(n);
1128 : }
1129 : double
1130 : getAverageNonDispersiveDryPathLength_GroundPressureDerivative(unsigned int spwid);
1131 : double
1132 : getAverageNonDispersiveDryPathLength_GroundTemperatureDerivative(unsigned int spwid);
1133 : double
1134 : getAverageDispersiveDryPathLength_GroundPressureDerivative(unsigned int spwid);
1135 : double
1136 : getAverageDispersiveDryPathLength_GroundTemperatureDerivative(unsigned int spwid);
1137 :
1138 240 : Length getAverageO2LinesPathLength(unsigned int spwid)
1139 : {
1140 240 : return RefractiveIndexProfile::getAverageO2LinesPathLength(spwid);
1141 : }
1142 : Length getAverageO2LinesPathLength()
1143 : {
1144 : unsigned int n = 0;
1145 : return getAverageO2LinesPathLength(n);
1146 : }
1147 :
1148 : /** Setter for a new set of basic atmospheric parameters. Automatically updates the AtmProfile
1149 : (if generated from this basic atmospheric parameters), RefractiveIndexProfile, and SkyStatus
1150 : objects if the one or more value differ from the previous ones (there is overloading) */
1151 : bool setBasicAtmosphericParameters(const Length &altitude,
1152 : const Pressure &groundPressure,
1153 : const Temperature &groundTemperature,
1154 : double tropoLapseRate,
1155 : const Humidity &humidity,
1156 : const Length &wvScaleHeight);
1157 : /** The same setter is available for only one parameter each time (except for "Length wvScaleHeight" due to a type
1158 : conflict with "Length altitude") */
1159 : bool setBasicAtmosphericParameters(const Length &altitude);
1160 : /** The same setter is available for only one parameter each time (except for "Length wvScaleHeight" due to a type
1161 : conflict with "Length altitude") */
1162 : bool setBasicAtmosphericParameters(const Temperature &groundTemperature);
1163 : /** The same setter is available for only one parameter each time (except for "Length wvScaleHeight" due to a type
1164 : conflict with "Length altitude") */
1165 : bool setBasicAtmosphericParameters(const Pressure &groundPressure);
1166 : /** The same setter is available for only one parameter each time (except for "Length wvScaleHeight" due to a type
1167 : conflict with "Length altitude") */
1168 : bool setBasicAtmosphericParameters(const Humidity &humidity);
1169 : /** The same setter is available for only one parameter each time (except for "Length wvScaleHeight" due to a type
1170 : conflict with "Length altitude") */
1171 : bool setBasicAtmosphericParameters(double tropoLapseRate);
1172 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1173 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1174 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1175 : bool setBasicAtmosphericParameters(const Length &altitude,
1176 : const Temperature &groundTemperature);
1177 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1178 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1179 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1180 : bool setBasicAtmosphericParameters(const Length &altitude, const Pressure &groundPressure);
1181 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1182 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1183 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1184 : bool setBasicAtmosphericParameters(const Length &altitude, const Humidity &humidity);
1185 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1186 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1187 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1188 : bool setBasicAtmosphericParameters(const Length &altitude, double tropoLapseRate);
1189 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1190 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1191 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1192 : bool setBasicAtmosphericParameters(const Length &altitude, const Length &wvScaleHeight);
1193 : /** The same setter is available for couples of parameters. The order does not matter */
1194 : bool setBasicAtmosphericParameters(const Temperature &groundTemperature,
1195 : const Pressure &groundPressure);
1196 : /** The same setter is available for couples of parameters. The order does not matter */
1197 : bool setBasicAtmosphericParameters(const Pressure &groundPressure,
1198 : const Temperature &groundTemperature);
1199 : /** The same setter is available for couples of parameters. The order does not matter */
1200 : bool setBasicAtmosphericParameters(const Temperature &groundTemperature,
1201 : const Humidity &humidity);
1202 : /** The same setter is available for couples of parameters. The order does not matter */
1203 : bool setBasicAtmosphericParameters(const Humidity &humidity,
1204 : const Temperature &groundTemperature);
1205 : /** The same setter is available for couples of parameters. The order does not matter */
1206 : bool setBasicAtmosphericParameters(const Temperature &groundTemperature,
1207 : double tropoLapseRate);
1208 : /** The same setter is available for couples of parameters. The order does not matter */
1209 : bool setBasicAtmosphericParameters(double tropoLapseRate,
1210 : const Temperature &groundTemperature);
1211 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1212 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1213 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1214 : bool setBasicAtmosphericParameters(const Temperature &groundTemperature,
1215 : const Length &wvScaleHeight);
1216 : /** The same setter is available for couples of parameters. The order does not matter */
1217 : bool
1218 : setBasicAtmosphericParameters(const Pressure &groundPressure, const Humidity &humidity);
1219 : /** The same setter is available for couples of parameters. The order does not matter */
1220 : bool
1221 : setBasicAtmosphericParameters(const Humidity &humidity, const Pressure &groundPressure);
1222 : /** The same setter is available for couples of parameters. The order does not matter */
1223 : bool setBasicAtmosphericParameters(const Pressure &groundPressure,
1224 : double tropoLapseRate);
1225 : /** The same setter is available for couples of parameters. The order does not matter */
1226 : bool setBasicAtmosphericParameters(double tropoLapseRate,
1227 : const Pressure &groundPressure);
1228 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1229 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1230 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1231 : bool setBasicAtmosphericParameters(const Pressure &groundPressure,
1232 : const Length &wvScaleHeight);
1233 : /** The same setter is available for couples of parameters. The order does not matter */
1234 : bool setBasicAtmosphericParameters(const Humidity &humidity, double tropoLapseRate);
1235 : /** The same setter is available for couples of parameters. The order does not matter */
1236 : bool setBasicAtmosphericParameters(double tropoLapseRate, const Humidity &humidity);
1237 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1238 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1239 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1240 : bool setBasicAtmosphericParameters(const Humidity &humidity, const Length &wvScaleHeight);
1241 : /** The same setter is available for couples of parameters. The order does not matter except for (Length altitude) and
1242 : (Length wvScaleHeight) because they are of the same type (Length). The convention is that if a type Length is in first
1243 : position, it represents the altitude, and if it is in second position, it represents wvScaleHeight */
1244 : bool setBasicAtmosphericParameters(double tropoLapseRate,
1245 : const Length &wvScaleHeight);
1246 :
1247 : /** Setter of new spectral windows (adds frequencies to the SpectralGrid and calculates the corresponding absorption coefficients) */
1248 : void addNewSpectralWindow(unsigned int numChan,
1249 : unsigned int refChan,
1250 : const Frequency &refFreq,
1251 : const Frequency &chanSep)
1252 : {
1253 : RefractiveIndexProfile::add(numChan, refChan, refFreq, chanSep);
1254 : }
1255 : /** Setter of new spectral windows (adds frequencies to the SpectralGrid and calculates the corresponding absorption coefficients) */
1256 : void addNewSpectralWindow(unsigned int numChan,
1257 : unsigned int refChan,
1258 : double* chanFreq,
1259 : Frequency::Units freqUnits)
1260 : {
1261 : RefractiveIndexProfile::add(numChan, refChan, chanFreq, freqUnits);
1262 : }
1263 : /** Setter of new spectral windows (adds frequencies to the SpectralGrid and calculates the corresponding absorption coefficients) */
1264 : void addNewSpectralWindow(unsigned int numChan,
1265 : double refFreq,
1266 : double* chanFreq,
1267 : Frequency::Units freqUnits)
1268 : {
1269 : RefractiveIndexProfile::add(numChan, refFreq, chanFreq, freqUnits);
1270 : }
1271 : /** Setter of new spectral windows (adds frequencies to the SpectralGrid and calculates the corresponding absorption coefficients) */
1272 : void addNewSpectralWindow(unsigned int numChan,
1273 : double refFreq,
1274 : const vector<double> &chanFreq,
1275 : Frequency::Units freqUnits)
1276 : {
1277 : RefractiveIndexProfile::add(numChan, refFreq, chanFreq, freqUnits);
1278 : }
1279 : /** Setter of new spectral windows (adds frequencies to the SpectralGrid and calculates the corresponding absorption coefficients) */
1280 : void addNewSpectralWindow(unsigned int numChan,
1281 : unsigned int refChan,
1282 : const Frequency &refFreq,
1283 : const Frequency &chanSep,
1284 : const Frequency &intermediateFreq,
1285 : const SidebandSide &sbSide,
1286 : const SidebandType &sbType)
1287 : {
1288 : RefractiveIndexProfile::add(numChan,
1289 : refChan,
1290 : refFreq,
1291 : chanSep,
1292 : intermediateFreq,
1293 : sbSide,
1294 : sbType);
1295 : }
1296 : void addNewSpectralWindow(const vector<Frequency> &chanFreq)
1297 : {
1298 : RefractiveIndexProfile::add(chanFreq);
1299 : }
1300 :
1301 : /** Zenith Water Vapor column retrieval based on fitting the vector of zenith atmospheric transmission given as input.
1302 : Requirements: A) The FTS individual frequencies must be in spectral window 0, and B) the input zenith atmospheric
1303 : transmission vector should match those frequencies (i.e. both vectors should have the same size),
1304 : C) the air mass for the retrieval is the current one. If a different one is desired, it should be
1305 : changed using the setAirMass setter. */
1306 : Length WaterVaporRetrieval_fromFTS(const vector<double> &v_transmission)
1307 : {
1308 : unsigned int spwId = 0;
1309 : Frequency f1(-999, Frequency::UnitGigaHertz);
1310 : Frequency f2(-999, Frequency::UnitGigaHertz);
1311 : return WaterVaporRetrieval_fromFTS(spwId, v_transmission, f1, f2);
1312 : }
1313 : /** Same as above but using for the retrieval only the measurements between frequencies f1 and f2>f1 */
1314 : Length WaterVaporRetrieval_fromFTS(const vector<double> &v_transmission,
1315 : const Frequency &f1,
1316 : const Frequency &f2)
1317 : {
1318 : unsigned int spwId = 0;
1319 : return WaterVaporRetrieval_fromFTS(spwId, v_transmission, f1, f2);
1320 : }
1321 : /** Zenith Water Vapor column retrieval based on fitting the vector of zenith atmospheric transmission given as input.
1322 : Requirements: A) The FTS individual frequencies must be in spectral window spwId, and B) the input zenith atmospheric
1323 : transmission vector should match those frequencies (i.e. both vectors should have the same size),
1324 : C) the air mass for the retrieval is the current one. If a different one is desired, it should be
1325 : changed using the setAirMass setter. */
1326 : Length WaterVaporRetrieval_fromFTS(unsigned int spwId,
1327 : const vector<double> &v_transmission)
1328 : {
1329 : Frequency f1(-999, Frequency::UnitGigaHertz);
1330 : Frequency f2(-999, Frequency::UnitGigaHertz);
1331 : return WaterVaporRetrieval_fromFTS(spwId, v_transmission, f1, f2);
1332 : }
1333 : /** Same as above but using for the retrieval only the measurements between frequencies f1 and f2>f1 */
1334 : Length WaterVaporRetrieval_fromFTS(unsigned int spwId,
1335 : const vector<double> &v_transmission,
1336 : const Frequency &f1,
1337 : const Frequency &f2);
1338 :
1339 : /** Zenith Water Vapor column retrieval based on fitting measured brightness temperatures of the atmosphere */
1340 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1341 : const vector<Percent> &signalGain,
1342 : const vector<vector<Temperature> > &vv_tebb,
1343 : const vector<vector<double> > &spwId_filters,
1344 : double airmass,
1345 : const vector<double> &skycoupling,
1346 : const vector<Temperature> &tspill);
1347 :
1348 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1349 : const vector<Percent> &signalGain,
1350 : const vector<Temperature> &v_tebb,
1351 : const vector<vector<double> > &spwId_filters,
1352 : double airmass,
1353 : const vector<double> &skycoupling,
1354 : const vector<Temperature> &tspill);
1355 :
1356 : /* to implement in .cpp
1357 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1358 : Percent signalGain,
1359 : Temperature tebb,
1360 : vector<double> spwId_filter,
1361 : double airmass,
1362 : double skycoupling,
1363 : Temperature tspill); */
1364 :
1365 :
1366 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1367 : const Percent &signalGain,
1368 : const vector<Temperature> &v_tebb,
1369 : const vector<double> &spwId_filter,
1370 : double airmass,
1371 : double skycoupling,
1372 : const Temperature &tspill);
1373 :
1374 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1375 : const Percent &signalGain,
1376 : const vector<Temperature> &v_tebb,
1377 : const vector<vector<double> > &spwId_filters,
1378 : double airmass,
1379 : double skycoupling,
1380 : const Temperature &tspill);
1381 :
1382 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1383 : const Percent &signalGain,
1384 : const vector<Temperature> &v_tebb,
1385 : double airmass,
1386 : double skycoupling,
1387 : const Temperature &tspill); // equivalent eliminating the vectors already implemented, see below
1388 :
1389 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1390 : const vector<Temperature> &v_tebb,
1391 : double skycoupling,
1392 : const Temperature &tspill);
1393 :
1394 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1395 : const vector<vector<Temperature> > &vv_tebb,
1396 : const vector<double> &skycoupling,
1397 : const vector<Temperature> &tspill);
1398 :
1399 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1400 : const vector<Temperature> &v_tebb,
1401 : const vector<double> &skycoupling,
1402 : const vector<Temperature> &tspill);
1403 :
1404 : /* to be implemented in the .cpp
1405 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1406 : Temperature tebb,
1407 : double skycoupling,
1408 : Temperature tspill); */
1409 :
1410 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1411 : const vector<Temperature> &v_tebb,
1412 : const vector<double> &spwId_filter,
1413 : double skycoupling,
1414 : const Temperature &tspill);
1415 :
1416 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1417 : const vector<vector<Temperature> > &vv_tebb,
1418 : const vector<vector<double> > &spwId_filters,
1419 : const vector<double> &skycoupling,
1420 : const vector<Temperature> &tspill);
1421 :
1422 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1423 : const vector<Temperature> &v_tebb,
1424 : const vector<vector<double> > &spwId_filters,
1425 : const vector<double> &skycoupling,
1426 : const vector<Temperature> &tspill);
1427 :
1428 : /* to be implemented in the .cpp
1429 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1430 : Temperature tebb,
1431 : vector<double> spwId_filters,
1432 : double skycoupling,
1433 : Temperature tspill); */
1434 :
1435 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1436 : const vector<Temperature> &v_tebb,
1437 : double airmass,
1438 : double skycoupling,
1439 : const Temperature &tspill);
1440 :
1441 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1442 : const vector<vector<Temperature> > &vv_tebb,
1443 : double airmass,
1444 : const vector<double> &skycoupling,
1445 : const vector<Temperature> &tspill);
1446 :
1447 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1448 : const vector<Temperature> &v_tebb,
1449 : double airmass,
1450 : const vector<double> &skycoupling,
1451 : const vector<Temperature> &tspill);
1452 :
1453 : /* to be implemented in the .cpp
1454 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1455 : const Temperature &tebb,
1456 : double airmass,
1457 : double skycoupling,
1458 : const Temperature &tspill); */
1459 :
1460 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1461 : const vector<Temperature> &v_tebb,
1462 : const vector<double> &spwId_filter,
1463 : double airmass,
1464 : double skycoupling,
1465 : const Temperature &tspill);
1466 :
1467 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1468 : const vector<vector<Temperature> > &vv_tebb,
1469 : const vector<vector<double> > &spwId_filters,
1470 : double airmass,
1471 : const vector<double> &skycoupling,
1472 : const vector<Temperature> &tspill);
1473 :
1474 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1475 : const vector<Temperature> &v_tebb,
1476 : const vector<vector<double> > &spwId_filters,
1477 : double airmass,
1478 : const vector<double> &skycoupling,
1479 : const vector<Temperature> &tspill);
1480 :
1481 : /* to be implemented in the .cpp
1482 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1483 : const Temperature &v_tebb,
1484 : const vector<double> &spwId_filter,
1485 : double airmass,
1486 : double skycoupling,
1487 : const Temperature &tspill); */
1488 :
1489 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1490 : const Percent &signalGain,
1491 : const vector<Temperature> &v_tebb,
1492 : double skycoupling,
1493 : const Temperature &tspill);
1494 :
1495 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1496 : const vector<Percent> &signalGain,
1497 : const vector<vector<Temperature> > &vv_tebb,
1498 : const vector<double> &skycoupling,
1499 : const vector<Temperature> &tspill);
1500 :
1501 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1502 : const vector<Percent> &signalGain,
1503 : const vector<Temperature> &v_tebb,
1504 : const vector<double> &skycoupling,
1505 : const vector<Temperature> &tspill);
1506 :
1507 : /* to be implemented in the .cpp
1508 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1509 : const Percent &signalGain,
1510 : constr Temperature &v_tebb,
1511 : double skycoupling,
1512 : const Temperature &tspill); */
1513 :
1514 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1515 : const Percent &signalGain,
1516 : const vector<Temperature> &v_tebb,
1517 : const vector<double> &spwId_filter,
1518 : double skycoupling,
1519 : const Temperature &tspill);
1520 :
1521 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1522 : const vector<Percent> &signalGain,
1523 : const vector<vector<Temperature> > &vv_tebb,
1524 : const vector<vector<double> > &spwId_filters,
1525 : const vector<double> &skycoupling,
1526 : const vector<Temperature> &tspill);
1527 :
1528 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1529 : const vector<Percent> &signalGain,
1530 : const vector<Temperature> &v_tebb,
1531 : const vector<vector<double> > &spwId_filters,
1532 : const vector<double> &skycoupling,
1533 : const vector<Temperature> &tspill);
1534 :
1535 : /* to be implemented in the .cpp
1536 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1537 : const Percent &signalGain,
1538 : const Temperature &v_tebb,
1539 : const vector<double> &spwId_filter,
1540 : double skycoupling,
1541 : const Temperature &tspill); */
1542 :
1543 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1544 : const Percent &signalGain,
1545 : const vector<Temperature> &v_tebb,
1546 : double airmass,
1547 : double skycoupling,
1548 : const Temperature &tspill);
1549 :
1550 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1551 : const vector<Percent> &signalGain,
1552 : const vector<vector<Temperature> > &vv_tebb,
1553 : double airmass,
1554 : const vector<double> &skycoupling,
1555 : const vector<Temperature> &tspill);
1556 :
1557 : Length WaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1558 : const vector<Percent> &signalGain,
1559 : const vector<Temperature> &v_tebb,
1560 : double airmass,
1561 : const vector<double> &skycoupling,
1562 : const vector<Temperature> &tspill);
1563 :
1564 : // implemented 17/9/09
1565 : Length WaterVaporRetrieval_fromTEBB(unsigned int spwId,
1566 : const Percent &signalGain,
1567 : const Temperature &tebb,
1568 : double airmass,
1569 : double skycoupling,
1570 : const Temperature &tspill);
1571 :
1572 : double SkyCouplingRetrieval_fromTEBB(unsigned int spwId,
1573 : const vector<Temperature> &v_tebb,
1574 : double skycoupling,
1575 : const Temperature &tspill);
1576 :
1577 : double SkyCouplingRetrieval_fromTEBB(unsigned int spwId,
1578 : const vector<Temperature> &v_tebb,
1579 : const vector<double> &spwId_filter,
1580 : double skycoupling,
1581 : const Temperature &tspill);
1582 :
1583 : double SkyCouplingRetrieval_fromTEBB(unsigned int spwId,
1584 : const vector<Temperature> &v_tebb,
1585 : double airmass,
1586 : double skycoupling,
1587 : const Temperature &tspill);
1588 :
1589 : double SkyCouplingRetrieval_fromTEBB(unsigned int spwId,
1590 : const vector<Temperature> &v_tebb,
1591 : const vector<double> &spwId_filter,
1592 : double airmass,
1593 : double skycoupling,
1594 : const Temperature &tspill);
1595 :
1596 : /** (Re)setter of water vapor radiometer channels */
1597 : void setWaterVaporRadiometer(const WaterVaporRadiometer &waterVaporRadiometer)
1598 : {
1599 : waterVaporRadiometer_ = waterVaporRadiometer;
1600 : }
1601 : /** Performs a sky coupling retrieval using WVR measurement sets between n and m
1602 : (obtains the ratio between the current sky couplings of all WVR channels and the best fit that
1603 : results from WVR measurement sets between n and m, keeping the other parameters unchanged)
1604 : and uses the result to update the Skycoupling of all WVR channels */
1605 : void updateSkyCoupling_fromWVR(vector<WVRMeasurement> &RadiometerData,
1606 : unsigned int n,
1607 : unsigned int m);
1608 : /** Performs a sky coupling retrieval using WVR measurement sets between n and m
1609 : (obtains the ratio between the current sky coupling of a single WVR channel (ichan) and the best fit that
1610 : results from WVR measurement sets between n and m, keeping the other parameters unchanged)
1611 : and uses the result to update the Skycoupling of than WVR channel */
1612 : void updateSkyCouplingChannel_fromWVR(vector<WVRMeasurement> &RadiometerData,
1613 : unsigned int ichan,
1614 : unsigned int n,
1615 : unsigned int m);
1616 : void updateSkyCoupling_fromWVR(vector<WVRMeasurement> &RadiometerData,
1617 : unsigned int n)
1618 : {
1619 : updateSkyCoupling_fromWVR(RadiometerData, n, n + 1);
1620 : }
1621 : void updateSkyCoupling_fromWVR(vector<WVRMeasurement> &RadiometerData,
1622 : unsigned int n,
1623 : unsigned int m,
1624 : WaterVaporRadiometer &external_wvr)
1625 : {
1626 : updateSkyCoupling_fromWVR(RadiometerData, n, m);
1627 : external_wvr = waterVaporRadiometer_;
1628 : }
1629 : void updateSkyCoupling_fromWVR(vector<WVRMeasurement> &RadiometerData,
1630 : unsigned int n,
1631 : WaterVaporRadiometer &external_wvr)
1632 : {
1633 : updateSkyCoupling_fromWVR(RadiometerData, n, n + 1);
1634 : external_wvr = waterVaporRadiometer_;
1635 : }
1636 : /** Accessor to the sky coupling of channel n of the Water Vapor Radiometer*/
1637 : double getWaterVaporRadiometerSkyCoupling(int n) const
1638 : {
1639 : return waterVaporRadiometer_.getSkyCoupling()[n];
1640 : }
1641 : /** Accessor to the sky coupling of channel n of the Water Vapor Radiometer*/
1642 : Percent getWaterVaporRadiometerSignalGain(int n) const
1643 : {
1644 : return waterVaporRadiometer_.getsignalGain()[n];
1645 : }
1646 : /** Performs water vapor retrieval for WVR measurement sets between n and m */
1647 : void WaterVaporRetrieval_fromWVR(vector<WVRMeasurement> &RadiometerData,
1648 : unsigned int n,
1649 : unsigned int m);
1650 : void WaterVaporRetrieval_fromWVR(vector<WVRMeasurement> &RadiometerData,
1651 : unsigned int n)
1652 : {
1653 : WaterVaporRetrieval_fromWVR(RadiometerData, n, n + 1);
1654 : }
1655 : /** Performs water vapor retrieval for one WVR measurement */
1656 : void WaterVaporRetrieval_fromWVR(WVRMeasurement &RadiometerData);
1657 : /** Accessor to get or check the water vapor radiometer channels */
1658 : WaterVaporRadiometer getWaterVaporRadiometer() const
1659 : {
1660 : return waterVaporRadiometer_;
1661 : }
1662 :
1663 : double
1664 : sigmaSkyCouplingRetrieval_fromWVR(double par_fit,
1665 : const WaterVaporRadiometer &wvr,
1666 : vector<WVRMeasurement> &RadiometerData,
1667 : unsigned int n,
1668 : unsigned int m);
1669 : double sigmaSkyCouplingRetrieval_fromWVR(double par_fit,
1670 : const WaterVaporRadiometer &wvr,
1671 : vector<WVRMeasurement> &RadiometerData,
1672 : unsigned int n)
1673 : {
1674 : return sigmaSkyCouplingRetrieval_fromWVR(par_fit, wvr, RadiometerData, n, n
1675 : + 1);
1676 : }
1677 :
1678 : /*
1679 : return the rms of the residuals for one channel ichan, as a function of the multiplicative
1680 : factor par_fit to this channel's coupling efficiency.
1681 : */
1682 : double sigmaSkyCouplingChannelRetrieval_fromWVR(double par_fit,
1683 : const WaterVaporRadiometer &wvr,
1684 : vector<WVRMeasurement> &RadiometerData,
1685 : unsigned int ichan,
1686 : unsigned int n,
1687 : unsigned int m);
1688 : Temperature getWVRAverageSigmaTskyFit(const vector<WVRMeasurement> &RadiometerData,
1689 : unsigned int n,
1690 : unsigned int m);
1691 : Temperature getWVRAverageSigmaTskyFit(const vector<WVRMeasurement> &RadiometerData,
1692 : unsigned int n)
1693 : {
1694 : return getWVRAverageSigmaTskyFit(RadiometerData, n, n + 1);
1695 : }
1696 : /*
1697 : return the rms of fit residual for a single channel, in a measurement
1698 : */
1699 : Temperature getWVRSigmaChannelTskyFit(const vector<WVRMeasurement> &RadiometerData,
1700 : unsigned int ichan,
1701 : unsigned int n,
1702 : unsigned int m);
1703 : /*
1704 : return the rms of water vapor retrieved values in a measurnment (n to m)
1705 : */
1706 : double getSigmaTransmissionFit(unsigned int spwId,
1707 : const vector<double> &v_transmission,
1708 : double airm,
1709 : const Frequency &f1,
1710 : const Frequency &f2);
1711 : //double getSigmaTransmissionFit(){}
1712 : Temperature getSigmaFit(unsigned int spwId,
1713 : const vector<Temperature> &v_tebbspec,
1714 : double skyCoupling,
1715 : const Temperature &Tspill)
1716 : {
1717 : return getSigmaFit(spwId, v_tebbspec, getUserWH2O(), skyCoupling, Tspill);
1718 : }
1719 : Temperature getSigmaFit(unsigned int spwId,
1720 : const vector<Temperature> &v_tebbspec,
1721 : const Length &wh2o,
1722 : double skyCoupling,
1723 : const Temperature &Tspill)
1724 : {
1725 : return getSigmaFit(spwId,
1726 : v_tebbspec,
1727 : wh2o,
1728 : getAirMass(),
1729 : skyCoupling,
1730 : Tspill);
1731 : }
1732 : Temperature getSigmaFit(unsigned int spwId,
1733 : const vector<Temperature> &v_tebbspec,
1734 : double airmass,
1735 : double skyCoupling,
1736 : const Temperature &Tspill)
1737 : {
1738 : return getSigmaFit(spwId,
1739 : v_tebbspec,
1740 : getUserWH2O(),
1741 : airmass,
1742 : skyCoupling,
1743 : Tspill);
1744 : }
1745 : Temperature getSigmaFit(unsigned int spwId,
1746 : const vector<Temperature> &v_tebbspec,
1747 : const Length &wh2o,
1748 : double airmass,
1749 : double skyCoupling,
1750 : const Temperature &Tspill);
1751 :
1752 : //@}
1753 :
1754 : protected:
1755 :
1756 : double airMass_; //!< Air Mass used for the radiative transfer
1757 : Temperature skyBackgroundTemperature_; //!< Blackbody temperature of the sky background
1758 : Length wh2o_user_; //!< Water vapor column used for radiative transfer calculations. If not provided,
1759 : //!< the one retrieved from the water vapor radiometer channels will be used.
1760 : WaterVaporRadiometer waterVaporRadiometer_; // !< Identifiers, sky coupling, and sideband gain of channels corresponding to the water vapor radiometer.
1761 :
1762 :
1763 : void iniSkyStatus(); //!< Basic Method initialize the class when using the constructors.
1764 : bool updateProfilesAndRadiance(const Length &altitude,
1765 : const Pressure &groundPressure,
1766 : const Temperature &groundTemperature,
1767 : double tropoLapseRate,
1768 : const Humidity &relativeHumidity,
1769 : const Length &wvScaleHeight);
1770 : void rmSkyStatus(); //!< Resets retrieved water column to zero, or the default value.
1771 :
1772 : Length mkWaterVaporRetrieval_fromFTS(unsigned int spwId,
1773 : const vector<double> &v_transmission,
1774 : //double airm, // unused parameter
1775 : const Frequency &f1,
1776 : const Frequency &f2);
1777 :
1778 0 : Length mkWaterVaporRetrieval_fromTEBB(unsigned int spwId,
1779 : const Percent &signalGain,
1780 : const vector<Temperature> &v_measuredSkyTEBB,
1781 : double airm,
1782 : const vector<double> &spwId_filter,
1783 : double skycoupling,
1784 : const Temperature &tspill)
1785 : {
1786 : return mkWaterVaporRetrieval_fromTEBB(
1787 0 : vector<unsigned int>(1, spwId),
1788 0 : vector<Percent>(1, signalGain),
1789 0 : vector<vector<Temperature> >(1, v_measuredSkyTEBB),
1790 : airm,
1791 0 : vector<vector<double> >(1, spwId_filter),
1792 0 : vector<double>(1, skycoupling),
1793 0 : vector<Temperature>(1, tspill));
1794 : }
1795 :
1796 : Length
1797 : mkWaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1798 : const vector<Percent> &signalGain,
1799 : const vector<vector<Temperature> > &measuredSkyTEBB,
1800 : double airm,
1801 : const vector<vector<double> > &spwId_filters,
1802 : const vector<double> &skycoupling,
1803 : const vector<Temperature> &tspill);
1804 :
1805 : Length
1806 : mkWaterVaporRetrieval_fromTEBB(const vector<unsigned int> &spwId,
1807 : const vector<Percent> &signalGain,
1808 : const vector<Temperature> &measuredAverageSkyTEBB,
1809 : double airm,
1810 : const vector<vector<double> > &spwId_filters,
1811 : const vector<double> &skycoupling,
1812 : const vector<Temperature> &tspill);
1813 :
1814 : double mkSkyCouplingRetrieval_fromTEBB(unsigned int spwId,
1815 : const Percent &signalGain,
1816 : const vector<Temperature> &measuredSkyTEBB,
1817 : double airm,
1818 : const vector<double> &spwId_filter,
1819 : double skycoupling,
1820 : const Temperature &tspill);
1821 :
1822 : WVRMeasurement
1823 : mkWaterVaporRetrieval_fromWVR(const vector<Temperature> &measuredSkyBrightnessVector,
1824 : const vector<unsigned int> &radiometricChannels,
1825 : const vector<double> &skyCoupling,
1826 : const vector<Percent> &signalGain,
1827 : const Temperature &spilloverTemperature,
1828 : const Angle &elevation);
1829 :
1830 : double RT(double pfit_wh2o,
1831 : double skycoupling,
1832 : double tspill,
1833 : unsigned int spwid,
1834 : unsigned int nc)
1835 : {
1836 : return RT(pfit_wh2o, skycoupling, tspill, airMass_, spwid, nc);
1837 : }
1838 : double RT(double pfit_wh2o,
1839 : double skycoupling,
1840 : double tspill,
1841 : unsigned int spwid)
1842 : {
1843 : return RT(pfit_wh2o, skycoupling, tspill, airMass_, spwid);
1844 : }
1845 : double RT(double pfit_wh2o,
1846 : double skycoupling,
1847 : double tspill,
1848 : double airmass,
1849 : unsigned int spwId,
1850 : unsigned int nc);
1851 :
1852 4 : double RT(double pfit_wh2o,
1853 : double skycoupling,
1854 : double tspill,
1855 : double airmass,
1856 : unsigned int spwid)
1857 : {
1858 4 : double tebb_channel = 0.0;
1859 8 : for(unsigned int n = 0; n < v_numChan_[spwid]; n++) {
1860 4 : tebb_channel = tebb_channel + RT(pfit_wh2o,
1861 : skycoupling,
1862 : tspill,
1863 : airmass,
1864 : spwid,
1865 4 : n) / (v_numChan_[spwid]);
1866 : }
1867 4 : return tebb_channel;
1868 : }
1869 :
1870 : double RT(double pfit_wh2o,
1871 : double skycoupling,
1872 : double tspill,
1873 : unsigned int spwid,
1874 : const Percent &signalgain)
1875 : {
1876 : vector<double> spwId_filter;
1877 : for(unsigned int n = 0; n < v_numChan_[spwid]; n++) {
1878 : spwId_filter.push_back(1.0);
1879 : }
1880 : return RT(pfit_wh2o,
1881 : skycoupling,
1882 : tspill,
1883 : airMass_,
1884 : spwid,
1885 : spwId_filter,
1886 : signalgain);
1887 : }
1888 :
1889 0 : double RT(double pfit_wh2o,
1890 : double skycoupling,
1891 : double tspill,
1892 : double airmass,
1893 : unsigned int spwid,
1894 : const Percent &signalgain)
1895 : {
1896 0 : vector<double> spwId_filter;
1897 0 : for(unsigned int n = 0; n < v_numChan_[spwid]; n++) {
1898 0 : spwId_filter.push_back(1.0);
1899 : }
1900 0 : return RT(pfit_wh2o,
1901 : skycoupling,
1902 : tspill,
1903 : airmass,
1904 : spwid,
1905 : spwId_filter,
1906 0 : signalgain);
1907 : }
1908 :
1909 : double RT(double pfit_wh2o,
1910 : double skycoupling,
1911 : double tspill,
1912 : unsigned int spwid,
1913 : const vector<double> &spwId_filter)
1914 : {
1915 : return RT(pfit_wh2o,
1916 : skycoupling,
1917 : tspill,
1918 : airMass_,
1919 : spwid,
1920 : spwId_filter,
1921 : Percent(100.0, Percent::UnitPercent));
1922 : }
1923 :
1924 : double RT(double pfit_wh2o,
1925 : double skycoupling,
1926 : double tspill,
1927 : unsigned int spwid,
1928 : const vector<double> &spwId_filter,
1929 : const Percent &signalgain)
1930 : {
1931 : return RT(pfit_wh2o,
1932 : skycoupling,
1933 : tspill,
1934 : airMass_,
1935 : spwid,
1936 : spwId_filter,
1937 : signalgain);
1938 : }
1939 :
1940 : double RT(double pfit_wh2o,
1941 : double skycoupling,
1942 : double tspill,
1943 : double airmass,
1944 : unsigned int spwid,
1945 : const vector<double> &spwId_filter,
1946 : const Percent &signalgain);
1947 :
1948 :
1949 : double RTRJ(double pfit_wh2o,
1950 : double skycoupling,
1951 : double tspill,
1952 : unsigned int spwid,
1953 : unsigned int nc)
1954 : {
1955 : return RTRJ(pfit_wh2o, skycoupling, tspill, airMass_, spwid, nc);
1956 : }
1957 : double RTRJ(double pfit_wh2o,
1958 : double skycoupling,
1959 : double tspill,
1960 : unsigned int spwid)
1961 : {
1962 : return RTRJ(pfit_wh2o, skycoupling, tspill, airMass_, spwid);
1963 : }
1964 : double RTRJ(double pfit_wh2o,
1965 : double skycoupling,
1966 : double tspill,
1967 : double airmass,
1968 : unsigned int spwId,
1969 : unsigned int nc);
1970 :
1971 0 : double RTRJ(double pfit_wh2o,
1972 : double skycoupling,
1973 : double tspill,
1974 : double airmass,
1975 : unsigned int spwid)
1976 : {
1977 0 : double trj_channel = 0.0;
1978 0 : for(unsigned int n = 0; n < v_numChan_[spwid]; n++) {
1979 0 : trj_channel = trj_channel + RTRJ(pfit_wh2o,
1980 : skycoupling,
1981 : tspill,
1982 : airmass,
1983 : spwid,
1984 0 : n) / (v_numChan_[spwid]);
1985 : }
1986 0 : return trj_channel;
1987 : }
1988 :
1989 : double RTRJ(double pfit_wh2o,
1990 : double skycoupling,
1991 : double tspill,
1992 : unsigned int spwid,
1993 : const Percent &signalgain)
1994 : {
1995 : vector<double> spwId_filter;
1996 : for(unsigned int n = 0; n < v_numChan_[spwid]; n++) {
1997 : spwId_filter.push_back(1.0);
1998 : }
1999 : return RTRJ(pfit_wh2o,
2000 : skycoupling,
2001 : tspill,
2002 : airMass_,
2003 : spwid,
2004 : spwId_filter,
2005 : signalgain);
2006 : }
2007 :
2008 : double RTRJ(double pfit_wh2o,
2009 : double skycoupling,
2010 : double tspill,
2011 : double airmass,
2012 : unsigned int spwid,
2013 : const Percent &signalgain)
2014 : {
2015 : vector<double> spwId_filter;
2016 : for(unsigned int n = 0; n < v_numChan_[spwid]; n++) {
2017 : spwId_filter.push_back(1.0);
2018 : }
2019 : return RTRJ(pfit_wh2o,
2020 : skycoupling,
2021 : tspill,
2022 : airmass,
2023 : spwid,
2024 : spwId_filter,
2025 : signalgain);
2026 : }
2027 :
2028 : double RTRJ(double pfit_wh2o,
2029 : double skycoupling,
2030 : double tspill,
2031 : unsigned int spwid,
2032 : const vector<double> &spwId_filter)
2033 : {
2034 : return RTRJ(pfit_wh2o,
2035 : skycoupling,
2036 : tspill,
2037 : airMass_,
2038 : spwid,
2039 : spwId_filter,
2040 : Percent(100.0, Percent::UnitPercent));
2041 : }
2042 :
2043 : double RTRJ(double pfit_wh2o,
2044 : double skycoupling,
2045 : double tspill,
2046 : unsigned int spwid,
2047 : const vector<double> &spwId_filter,
2048 : const Percent &signalgain)
2049 : {
2050 : return RTRJ(pfit_wh2o,
2051 : skycoupling,
2052 : tspill,
2053 : airMass_,
2054 : spwid,
2055 : spwId_filter,
2056 : signalgain);
2057 : }
2058 :
2059 : double RTRJ(double pfit_wh2o,
2060 : double skycoupling,
2061 : double tspill,
2062 : double airmass,
2063 : unsigned int spwid,
2064 : const vector<double> &spwId_filter,
2065 : const Percent &signalgain);
2066 :
2067 :
2068 : private:
2069 :
2070 : // no accessors provided for these
2071 : double sigma_transmission_FTSfit_;
2072 : Temperature sigma_TEBBfit_;
2073 :
2074 : }; // class SkyStatus
2075 :
2076 : ATM_NAMESPACE_END
2077 :
2078 : #endif /*!_ATM_SKYSTATUS_H*/
|
