Line data Source code
1 : //# FluxStdsQS.cc: Definition of the flux standards which do not explicitly
2 : //# depend on time.
3 : //# Copyright (C) 1996,1997,1999,2001,2002, 2010
4 : //# Associated Universities, Inc. Washington DC, USA.
5 : //#
6 : //# This library is free software; you can redistribute it and/or modify it
7 : //# under the terms of the GNU Library General Public License as published by
8 : //# the Free Software Foundation; either version 2 of the License, or (at your
9 : //# option) any later version.
10 : //#
11 : //# This library is distributed in the hope that it will be useful, but WITHOUT
12 : //# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 : //# FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public
14 : //# License for more details.
15 : //#
16 : //# You should have received a copy of the GNU Library General Public License
17 : //# along with this library; if not, write to the Free Software Foundation,
18 : //# Inc., 675 Massachusetts Ave, Cambridge, MA 02139, USA.
19 : //#
20 : //# Correspondence concerning AIPS++ should be addressed as follows:
21 : //# Internet email: aips2-request@nrao.edu.
22 : //# Postal address: AIPS++ Project Office
23 : //# National Radio Astronomy Observatory
24 : //# 520 Edgemont Road
25 : //# Charlottesville, VA 22903-2475 USA
26 : //#
27 :
28 : #include <components/ComponentModels/FluxStdsQS.h>
29 : //#include <casa/Logging/LogIO.h>
30 :
31 : using namespace casacore;
32 : namespace casa { //# NAMESPACE CASA - BEGIN
33 :
34 : // Each of these c'tors defines the polynomial coefficients for the
35 : // log10(fluxDensity) = polynomial(log10(frequency)) calculations
36 : // and optionally additional coefficients for estimating the flux density
37 : // uncertainties.
38 : //
39 : // fill_coeffs() with two RigidVectors uses the first one for the flux density
40 : // coefficients and second one for the uncertainty coefficients, starting at
41 : // order 0. If the second RigidVector is omitted no uncertainty will be
42 : // estimated.
43 :
44 :
45 0 : Bool FluxStdBaars::setSourceCoeffs()
46 : {
47 0 : Bool found = true;
48 :
49 0 : setFreqUnit("MHz");
50 0 : FCQS::Source srcEnum = FluxCalcQS::getSrcEnum();
51 :
52 0 : if(srcEnum == FCQS::THREEC286)
53 0 : fill_coeffs(RVF3(1.480, 0.292, -0.124), RVF3(0.018, 0.006, 0.001));
54 0 : else if(srcEnum == FCQS::THREEC48)
55 0 : fill_coeffs(RVF3(2.345, 0.071, -0.138), RVF3(0.03, 0.001, 0.001));
56 0 : else if(srcEnum == FCQS::THREEC147)
57 0 : fill_coeffs(RVF3(1.766, 0.447, -0.184), RVF3(0.017, 0.006, 0.001));
58 0 : else if(srcEnum == FCQS::THREEC138)
59 0 : fill_coeffs(RVF3(2.009, -0.07176, -0.0862)); // No error specified
60 0 : else if(srcEnum == FCQS::NINETEEN34M638)
61 0 : fill_coeffs(RVF4(-23.839, 19.569, -4.8168, 0.35836)); // No error specified
62 0 : else if(srcEnum == FCQS::THREEC295)
63 0 : fill_coeffs(RVF3(1.485, 0.759, -0.255), RVF3(0.013, 0.009, 0.001));
64 : else
65 0 : found = false;
66 0 : return found;
67 : }
68 :
69 0 : Bool FluxStdPerley90::setSourceCoeffs()
70 : {
71 0 : Bool found = true;
72 :
73 0 : setFreqUnit("MHz");
74 0 : FCQS::Source srcEnum = FluxCalcQS::getSrcEnum();
75 :
76 0 : if(srcEnum == FCQS::THREEC286)
77 0 : fill_coeffs(RVF3(1.35899, 0.3599, -0.13338));
78 0 : else if(srcEnum == FCQS::THREEC48)
79 0 : fill_coeffs(RVF3(2.0868, 0.20889, -0.15498));
80 0 : else if(srcEnum == FCQS::THREEC147)
81 0 : fill_coeffs(RVF3(1.92641, 0.36072, -0.17389));
82 0 : else if(srcEnum == FCQS::THREEC138)
83 0 : fill_coeffs(RVF3(2.009, -0.07176, -0.0862));
84 0 : else if(srcEnum == FCQS::NINETEEN34M638)
85 0 : fill_coeffs(RVF4(-30.7667, 26.4908, -7.0977, 0.605334));
86 0 : else if(srcEnum == FCQS::THREEC295)
87 0 : fill_coeffs(RVF3(1.485, 0.759, -0.255));
88 : else
89 0 : found = false;
90 0 : return found;
91 : }
92 :
93 0 : Bool FluxStdPerleyTaylor95::setSourceCoeffs()
94 : {
95 0 : Bool found = true;
96 :
97 0 : setFreqUnit("MHz");
98 0 : FCQS::Source srcEnum = FluxCalcQS::getSrcEnum();
99 :
100 0 : if(srcEnum == FCQS::THREEC286)
101 0 : fill_coeffs(RVF4(0.50344, 1.05026, -0.31666, 0.01602));
102 0 : else if(srcEnum == FCQS::THREEC48)
103 0 : fill_coeffs(RVF4(1.16801, 1.07526, -0.42254, 0.02699));
104 0 : else if(srcEnum == FCQS::THREEC147)
105 0 : fill_coeffs(RVF4(0.05702, 2.09340, -0.7076, 0.05477));
106 0 : else if(srcEnum == FCQS::THREEC138)
107 0 : fill_coeffs(RVF4(1.97498, -0.23918, 0.01333, -0.01389));
108 0 : else if(srcEnum == FCQS::NINETEEN34M638)
109 0 : fill_coeffs(RVF4(-30.7667, 26.4908, -7.0977, 0.605334));
110 0 : else if(srcEnum == FCQS::THREEC295)
111 0 : fill_coeffs(RVF4(1.28872, 0.94172, -0.31113, 0.00569));
112 : else
113 0 : found = false;
114 0 : return found;
115 : }
116 :
117 0 : Bool FluxStdPerleyTaylor99::setSourceCoeffs()
118 : {
119 0 : Bool found = true;
120 :
121 0 : setFreqUnit("GHz");
122 0 : FCQS::Source srcEnum = FluxCalcQS::getSrcEnum();
123 :
124 : //LogIO os(LogOrigin("FluxStdPerleyTaylor99", "setSourceCoeffs", WHERE));
125 : // os << LogIO::NORMAL
126 : // << "srcEnum before fill_coeffs() = " << srcEnum
127 : // << LogIO::POST;
128 :
129 0 : if(srcEnum == FCQS::THREEC286)
130 0 : fill_coeffs(RVF4(1.23734, -0.43276, -0.14223, 0.00345));
131 0 : else if(srcEnum == FCQS::THREEC48)
132 0 : fill_coeffs(RVF4(1.31752, -0.74090, -0.16708, 0.01525));
133 0 : else if(srcEnum == FCQS::THREEC147)
134 0 : fill_coeffs(RVF4(1.44856, -0.67252, -0.21124, 0.04077));
135 0 : else if(srcEnum == FCQS::THREEC138)
136 0 : fill_coeffs(RVF4(1.00761, -0.55629, -0.11134, -0.0146));
137 0 : else if(srcEnum == FCQS::NINETEEN34M638){
138 : // The broken polynomial is smooth enough to be 1st-order differentiable.
139 : //
140 : // The coefficients have been shifted to use GHz instead of MHz.
141 0 : fill_lohi_coeffs(RVF4(1.170418, 0.248618, -1.649694, 0.605334), // Low
142 0 : MFrequency(Quantity(10.0, "GHz")), // break
143 0 : RVF4(-2.5739, 10.0707, -10.0595, 2.9372)); // High
144 : }
145 0 : else if(srcEnum == FCQS::THREEC295)
146 0 : fill_coeffs(RVF4(1.46744, -0.7735, -0.25912, 0.00752));
147 : else
148 0 : found = false;
149 0 : return found;
150 : }
151 :
152 0 : Bool FluxStdPerleyButler2010::setSourceCoeffs()
153 : {
154 0 : Bool found = true;
155 :
156 0 : setFreqUnit("GHz");
157 0 : FCQS::Source srcEnum = FluxCalcQS::getSrcEnum();
158 :
159 0 : if(srcEnum == FCQS::THREEC286)
160 0 : fill_coeffs(RVF4(1.2361, -0.4127, -0.1864, 0.0294));
161 0 : else if(srcEnum == FCQS::THREEC48)
162 0 : fill_coeffs(RVF4(1.3197, -0.7253, -0.2023, 0.0540));
163 0 : else if(srcEnum == FCQS::THREEC147)
164 0 : fill_coeffs(RVF4(1.4428, -0.6300, -0.3142, 0.1032));
165 0 : else if(srcEnum == FCQS::THREEC138)
166 0 : fill_coeffs(RVF4(1.0053, -0.4384, -0.1855, 0.0511));
167 0 : else if(srcEnum == FCQS::NINETEEN34M638){
168 : // The broken polynomial is smooth enough to be 1st-order differentiable.
169 : //
170 : // The coefficients have been shifted to use GHz instead of MHz.
171 0 : fill_lohi_coeffs(RVF4(1.170418, 0.248618, -1.649694, 0.605334), // Low
172 0 : MFrequency(Quantity(10.0, "GHz")), // break
173 0 : RVF4(-2.5739, 10.0707, -10.0595, 2.9372)); // High
174 : }
175 0 : else if(srcEnum == FCQS::THREEC295)
176 0 : fill_coeffs(RVF4(1.4605, -0.7043, -0.3951, 0.0815));
177 0 : else if(srcEnum == FCQS::THREEC196)
178 0 : fill_coeffs(RVF4(1.2753, -0.7971, -0.2255, 0.0380));
179 : else
180 0 : found = false;
181 0 : return found;
182 : }
183 :
184 0 : Bool FluxStdPerleyButler2013::setSourceCoeffs()
185 : {
186 0 : Bool found = true;
187 0 : setFreqUnit("GHz");
188 0 : FCQS::Source srcEnum = FluxCalcQS::getSrcEnum();
189 : //Vector<Float> coeffs(5), coefferrs(5);
190 :
191 : // four sources: 3C123,3C196,3C286,3C295
192 : // this coefficients are as of 2012.09.13 given by Bryan Butler (CAS-4489)
193 : // revised coefficients Oct 1, 2012 (TT)
194 : //
195 0 : if(srcEnum == FCQS::THREEC286)
196 : //2012.09.13 values
197 : //fill_coeffs(RVF4(1.2553, -0.4689, -0.1597, 0.0286), RVF4(0.0006, 0.0006, 0.0002, 0.0003));
198 : //3C286 revised values as of Oct 1, 2012.
199 0 : fill_coeffs(RVF4(1.2515, -0.4605, -0.1715, 0.0336), RVF4(0.0006, 0.0006, 0.0002, 0.0003));
200 0 : else if(srcEnum == FCQS::THREEC123) {
201 :
202 : /*** 2012.09.13 values
203 : coeffs(0)=1.8070;
204 : coefferrs(0)=0.0007;
205 : coeffs(1)=-0.7367;
206 : coefferrs(1)=0.0014;
207 : coeffs(2)=-0.3162;
208 : coefferrs(2)=0.0039;
209 : coeffs(3)=0.2045;
210 : coefferrs(3)=0.0037;
211 : coeffs(4)=-0.0672;
212 : coeffs(4)=0.0013;
213 : fill_coeffs(RVF5(coeffs),RVF5(coefferrs));
214 : ***/
215 : //3C123 revised values as of Oct 1, 2012
216 : // now only given to 2nd order
217 0 : fill_coeffs(RVF3(1.8077, -0.8018, -0.1157),RVF3(0.0007, 0.0014, 0.0039));
218 : }
219 0 : else if(srcEnum == FCQS::THREEC295)
220 : // 2012.09.13 values
221 : //fill_coeffs(RVF4(1.4832, -0.7749, -0.3529, 0.0767),RVF4(0.0007, 0.0006, 0.0003, 0.0003));
222 : // 3C295 Oct 1, 2012
223 0 : fill_coeffs(RVF4(1.4866, -0.7871, -0.3440, 0.0749),RVF4(0.0007, 0.0006, 0.0003, 0.0003));
224 0 : else if(srcEnum == FCQS::THREEC196) {
225 : /*** 2012.09.13 values
226 : coeffs(0)=1.2892;
227 : coefferrs(0)=0.0007;
228 : coeffs(1)=-0.7973;
229 : coefferrs(1)=0.0017;
230 : coeffs(2)=-0.3504;
231 : coefferrs(2)=0.0036;
232 : coeffs(3)=0.1835;
233 : coefferrs(3)=0.0028;
234 : coeffs(4)=-0.0452;
235 : coefferrs(4)=0.0009;
236 : fill_coeffs(RVF5(coeffs),RVF5(coefferrs));
237 : ***/
238 : // 3C196 Oct 1 2012 values has less terms
239 0 : fill_coeffs(RVF4(1.2969, -0.8690, -0.1788, 0.0305), RVF4(0.0007, 0.0017, 0.0036, 0.0028));
240 : }
241 : else
242 0 : found = false;
243 0 : return found;
244 : }
245 :
246 :
247 : } //# NAMESPACE CASA - END
|